Search results

I don't have an A3 but I would drain the tank. Drain plug at the bottom. Clean it with diesel and change the fuel filters. If that fails then I would consider blowing the lines.

Thanks dcwilke for posting this thread. I installed mine today with good success. I had to use a 1/8 ntp nipple close and a 1/8 ntp coupling to make this regulator work. Thread in to decrease pressure and thread out to increase. The TM had me doing it backwards. This is an easy fix so if your...

I vote bearing melted. Let us know what you find out.

I enjoy mine but could never drive it daily. MPG is like 8 and top speed 50. It's a monster off road. Pretty easy to work on. Make sure you have space to keep it. I own mine purely as a hobby.

Photo's!! sounds like you got a runner. Tackle that brake problem first thing.

What is the relief port? Is it the vent line coming out the top. Could you go into more detail? Thanks

I think mines a dynamax as well. I did not even try to hid mine. Just had it welded to the upper exhaust. With out a doubt it helps out with the sound. A walker would be nice but they look bulky.

I am going to order from Mcmaster. 5296K421 High-Temp/Medium-Pressure Coolant Hose 2" ID, 2-3/8" OD, 50 PSI, Blue Thanks guys

Just take your time and relax. Most every thing on a deuce is pretty start forward. My words of advice is do one thing at a time. Otherwise you will feel overwhelmed [thumbzup]

What ever you decide good luck. However make sure you understand how GL works before you bid and preview. Also, keep in parts and service can be expensive if preformed by others.

I would pull the cab plate over the transmission and check the spring vent infront of the shifter. Then cahnge the gear oil and pull the inspection plate near the bell housing. Look in there and hit that grease fitting. I had problems with my oil pressure and temp. Simple fix is to just replace...

Upper radiator hose looks like 1 3/4". Guessing the lines that run across the engine are 1/2".

Hey, I got my radiator back from the shop and purchased the lower radiator hose from OD Iron. Going to change it out this Friday. I am posting because i need some help with parts. Do you happen to remeber the size/diameter of the upper radiator hose, hoses from the pumps, and the two hoses...

1. There are fill plugs on both trans and transfer. Crawl under the truck and you will find them in two seconds. I use a 1/2 breaker bar non racheting from Sears. Works great for those square plugs. 2. I used Valvoline 85-90 gear oil I think. 3. Lug nut is 1-1/2". I would say you need an 1/2"...

Oh yeah there outlets in some spots for power. CARNC i would reccomend parking in one of these spots since your camping. If you need help seting up I am only 5 minutes away. Edit: Oops sorry Carnc poor wording on my part. Let me change my wording.

How much does it cost to have one rebuilt?

I would like one as well. Hope someone has a cheap source.

FYI: just a guy taking photo's i have no idea exactly what the setup is going to be. GA MVPA is hosting. I saw this sign in the Trackside Parking Lot. Thought it was funny to post since i driving my deuce there. The Tunnel in the first couple of photos allows foot traffic from downtown into...

Becareful of that tire. I was warned about these military tires by a Seabee. If the ring pops off the rim it could hurt or kill you. Glad to hear no one was hurt.

I eating dinner at Trackside in Kennesaw right now. I will post some pictures of the lot. FYI there is a train crossing that could cause a long truck or trailer to bottom out.