Search results

i have a feeling the winches and maybe even the snatch blocks will get a little use.

tranny fluid level was correct. it was 90 wt that was leaking out the front. pulled the tranny today. talked with hookin1 and figured out what it needs. we are looking for a trans used or rebuilt so we can get this thing running by tuesday morning for the Grayling trail ride. anyone with an...

emergency emergency in Michigan! Attention all deuce owners! I am looking for a good used transmission or a rebuilt one in Michigan. I would prefer from Clare north but will consider all options. Trying to get my truck back together for our Grayling trail ride. Drove it home from Jackson to...

thanks Eddie. i will shoot him a note.

can any one tell me the part number for the imput shaft seal on the M109 transmission (duece). a friend (citizensoldier) just bought one and drove it 200 miles home and the front seal is toast. we were hoping to replace it in the morning.

Trailers on trail rides. just seems to go together does'nt it.

do you mean after it enters the nozzel ?

mine must have been unhooked when i bought the truck. never heard it.

if i cared i would fix mine but i dont. 1 hour and its O psi. no big deal to me.

gauge ? how long since the oil was changed ? not sure. maybe wiil wagner will pop in here and give you some ideas.

my XM818 runs about 35-39 at idle and 62-64 at full rpm full load. these are at 190*

thanks Kenny. having very strange occurances going on and i think the trouble is in that black box. it's a intermittant low voltage issue that corrects itself when the throttle position is varied ever so slightly. ODD ! VERY ODD. cant find that issue of MV mag.

still having electrical issues with the XM818w/w . can anyone shed more light on this control box operation or purpose ?

DDoyle is correct. just had my XM818 hanging in the air. had to replace a wheel cyl and while adjusting the brakes the wheels only turned forward.

they are water proof plugs. the wire does thread onto the plug. they are availible just expensive.

earning it's keep! and your having fun at the same time. way cool.

i was'nt real clear on my thoughts. yes pull the linkage off the pto and try to feel the detents in the rail. but first with the pto in nuetral and engine off, try turning the winch drive shaft by hand or with a bar thru the yoke both directions while having helper apply constant pressure to the...

try turning winch drive shaft by hand or with a bar thru the yoke. of course with eng OFF and pto and transmission in nuetral. while turning the shaft 1 or 2 revs each way, have a helper apply steady pressure to the winch lever. not to much but steady. you also can pop the 1 bolt out of the end...

anyone have a source for spring ride seat cusihion both bottom and back ?

all the civi vehicles use the short belt mentioned above. short belt to cab floor. seat belt and the short belt both mount at the seat with the same bolt. this gives you your required seat belt and attaches the seat (with movment ) to the cab floor. the purpose of the short belt is to keep the...