Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Yes you can
3/16 1095 or plow sheet steel welded inside of hood and bonnet/hood must be open full and buttressed.
No way do you just want the windshield between you and the strained pulled load.
Do it like the three man job such as it is. Two in a pinch off to the side with snatch blocks
Aircraft use plastic windshields
gas masks use plastic
Strong stuff
I still have a bit of it from August 9, 1945
which flavor plastic to use?
https://www.youtube.com/watch?v=SyYxYuRiHVE
"It was sthere as soon as the tires and new wheels were installed."
So you have answered the question
Change them out one at a time with the matched set spare, you'll find it
I just posted about the seal kit.
Raybestos Brake Master Cylinder Kit MK1624 at $58.99 total with 30 day refund buyer pays return shipping.
"At the moment there is a RAYBESTOS MK1624 seal kit on the popular auction site with the funny seals mentioned by rustystud for under 60 bucks. Perhaps...
Here are some photos of a dual brake system. See where the MC hides.
At the moment there is a RAYBESTOS MK1624 seal kit on the popular auction site with the funny seals mentioned by rustystud for under 60 bucks. Perhaps this seal kit is for the dual brake MC I don't know.
It is...
The oil pressure will go up as she runs out of crankcase lube oil.
Oil, the proper oil for the multfuel crankcase, is cheap.
Do not skimp
follow what the good men said
Just keep her at the mark, get a case of brake kleen and drive her home.
Other stuff may impede your progress
Get Her home to...
I was looking for "B" battery information. Did the first bazooka with wooden handles use them.
B batteries were used at the time for tube radios.
Then I found that 6 bazooka were mounted on one very light aircraft.
Upon arriving in France in 1944, US Army Major Charles Carpenter, an Army...
RTV the zippers as per TM
Wiil not leak
These are dust boots, not grease boots
Pull the plug like it says in the TM to grease properly.
OH my, what TM says that?
Grind up a 4 square machinist tool bit with one cuttin edge
Does Not have be big
................even 1/4" will do.
Drill hole in middle of the bolt IN THE MIDDLE OF IT, and slam in your new "toolbit"
and the square drive will give good wrench hold.
Use a square drive socket on ratchet ...
M917 Military Dump Truck manufactured by AM General with a Cummins NTC-400 Diesel Engine and 16-Speed Caterpillar 7155 Semi-Automatic Transmission. The M917 series truck has a 75,000 LB GVWR and a Hydraulic Dump Box that can haul up to 20 cu yd of material. This truck has a Hard Top, Cab Heater...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.