Search results

The ambiant temp there is running all around the freezing level. So what is the cement temperature and did the "puddle" dry up without leaving a mark or is it still there? Put some newspaper there and see what you get. Run it and see. Anyhow you might be ready to go but is the truck? It could...

how is this one?

In the beginning of Deuce when it was the military truck it did in fact carry all the ammo water food shelter humans to wherever it needed to be. Go play in the mud and make believe but put 2 or 3 ton in the back and then go play. It was built to get the payload there, thru the woods and what...

That DP is set for a 1/4" chuck at the speeds one would use that for. Available speeds to be selected will reflect that fact. What is the capacity of the chuck that came with it in the box is why some asked for the picture of the side of the chuck. Data says it is rated at one quarter inch...

always use a gauge at the root of the problem, they are cheap.

You now have a truck you must keep forever.

Yes, that is the one, Thank You

3413-00-221-8714 3413002218714 OO-D-676 R53 MAXWELL DP-815 Drilling Machine, Upright Mounting Type: Bench Voltage IN Volts: 115.000 Drilling Capability: 1/4 in mild steel Federal Specifications (81348) Salem Tool Co. (65383) High Speed Hammer Company Inc. (28626) still searching...

I recently read a interesting thread post about the patent office and when I do the search for it everytime it comes back to say page 112 in here but there is only 32 pages I can find. Did the searches fail or is that part of the thread gone? Here it is, the search results that is Show us your...

Yep, that is gone from the post, I was looking for that.

60,000 BTU First day of winter in a few daze I could use that maybe!

You do not have a normal 1993 M35A3, you have what is left of what used to be one. Post particulars, especially pictures. And Where in South Jersey? County?

Really nice posts in this thread

The title of the youtube is the title of this thread the youtube is by summers1976 Published on Dec 11, 2017 1991 Humvee M1038. 98,000 miles. Diesel Cold start Category People & Blogs License Standard YouTube License No further references found

Man, I got to read better.................. Didn't even realize it was in the classifieds. Wish it could just be swapped to the forum! Thanks.

The return line is supposed to be solid copper tubing. How did that get messed with? Could be a problem, If the return to the tank is not very strong it will squash in?

Is that 16° to 24° in Celsius or Fahrenheit? After the doctor looks at everything and hears all the comments He would say "Don't shut off the pump, that'll be fifty dollars"

Hey, good title there.

Is there a place on your truck to put a bleed tygon tubing that you could see?

One can prove air in fuel, just replace that little valve in the center of these photos with a proper valve that can have a gauge or a clear tubing (tygon) tubing from it. Put tubing to a bucket from that valve atop the secondaries and turn on whatever in- tank pump is. It is also good when...