Search results

Did you pull the in-tank pump and replace the outlet hose? Where did you put the in-line pump that could be sucking air thru a bad in-tank pump output hose.

One could find multiple gaskets, wrong gaskets, ruined gaskets, etc in there Did good Just take the whole thing off and do it right one time. Do you know what is behind there? Now take the silly little valve off and put a good one, very useful, put a tee with a gauge so you can figure out...

That was me remembering in post 30 Stuff was good to go when they released a truck for service, only stuff they missed was that which one has to drive it as fast as it will go problems.

Some would put UV dye into the coolant for finding leaks. Leaks will glow under fluorescent black light, stuff is about 7 bucks. Leak will show as a glow under UV light, like your blacklight or a new LED UV flashlight is 9 bucks at Wally World.

ok, this is not an open aution, that one was sold. Due to you comments methinks no one but you knows what you want. It is OK Lots of people want stuff for just a few bucks, an in-tank fuel pump is about 75 bucks and up and up and up goto...

deleted

The Bradley take out pumps which are as new go right in the Deuce tank without problems. They are about 75 bucks now on a popular auction site. Have your neighbor buy you one with her PayPal.

rustystud post the link to all your heater setup pictures or post them here, You always get honorable mention for your stuff. Help add to the being in the land of crystal clarity a bit more.

You are going to find out real quick what you don't have for what it is you want to do. The game is don't buy sets and sets of stuff that You will never use. Get a really good pair of Klein diagonal cutters (dykes) and needle nose Vise-Grips. Don't skimp get the real ones. Look First get the...

Take the truck and clean out all that oil on sale at 2 bucks a gallon. It comes in all its own storage containers! And post where you got it within the SS rules too, Please

I don't wonder where rustystud got that one from...............

Well well the TM's ...................... You can not be an idiot if you read the TM's You need everything I have been selling off for three months!

I always saved this up, haven't a clue what to do with it but it could be a start of something someone needs. It is only 3/8" steel.

Validate your heater hoses hookups by searching Steel Soldiers. Also search for coolant filter setup with and without a cab heater. Anyhow, here is some stuff to add to the confusion. What not to do with or without a filter. and pictures of what has been done with coolant filters, with and...

The number is stamped in the steel above the steering arm drivers side.

It'll burn just fine. I ran 90% new motor oil of all flavors. The truck liked it.

Did the Koreans field their new planned 105mm on the back of a KM500? It was planned to be back in 2011. Thats one nasty truck. I see the M119A1 was rated at 90 rounds of 4" stuff in 30 minutes up to 12 miles, at 3rpm. https://www.youtube.com/watch?v=hRaMiC6AjXo and Mandus was building one on...

"Which brings us back to, what are the measurements if I get the spring pack made locally? In particular the free arch of the springs?" As the NSN and part number as presented in the PDF leads to part target...

Wasn't there a popular thread Hot Hub? Yep, Hot Hub that on first glance many of us read Hot Tub. Information contained within that thread is enlightening. https://www.steelsoldiers.com/showthread.php?31749-Hot-Hub The seals are from Korea? Not sure. I don't remember a country of origin...

The originals where built on a jig, right? Inside with good light and heat, closer to power, flat floor, it is difficult to see a down side to your plan. I have a 3'x4' 20 ton cart for when you want to roll it out.