Search results

Who is Glen?

Can't be much different....I may just bypass and remove it till I find one.

Nor cal....SF area

Can you provide a napa part number for the chamber?

I found the source of my fuel pump leak on my M923A1, its the little valve assy on the emergency fuel cutoff, the shaft is really loose and if I wiggle it while truck is running it squirts out fuel...I'm actually surprised I didn't loose prime with this issue, truck starts and runs fine. what I...

Yes, the outer is a type12 or T12 from NAPA....I'm not gonna bother trying to work on my old chamber, that is unless at some point in the future I find a shop or someone on this forum will do it and has the correct safety tools to do it. you can buy the entire assy from eastern or Saturn surplus...

You done take it apart....you cage it with the provided tool, remove the outer band and the entire chamber comes off, the spring you refer to is on the caged side in the large chamber....NEVER take that apart. I talked with big rig shop and the guy said that even if caged, he has seen broken...

Well, I put it in anyway....seems to work fine.

Question....my 3rd axle's spring brake chamber has a bad diaphragm, I ordered a take off and what showed up was a spring brake chamber for axle no.2 the diff is there are only 2 air fittings on the #2 spring brake and the placement of the cage tool will be different then the one it is...

How do you know it's the temp gauge? Could be the sender or the wire...bad ground. I've had all three issues at some time or another. But if a bad gauge, replace it.

that Thermostat looks correct...My H1 Hummer has 2, they are/were notorious for being bad, mine were stuck open....so the engince never went above 170, regadless of the temp and took some time to get to Operating temp...changed them out and Bammm! All good. And Yes, Same Guy....Its a 10min...

Who did you speak with at Kascar? I talk to them every day....I will be more then happy to straighten them out on this issue. Your truck is not in Iraq in sweltering heat, he was in New Jersey on a nice day. The 6.5s I have done run at what I like to say "just left of 200". Does your temp gauge...

First things fist..... you would know if the fan clutch is working cuz when it kicks in you will hear and feel the loss of power. with engine running cold...unplug the TDM wire...it's the plug with 2 wires not the one with 4. the fan should move in and out....it fails in the engaged mode, the...

Bumper, 2 outer, 2 inner frame brackets, 4 shim plates, 2 inner brackets that un from the bumper pintle to the frame and if you like but not required, 2 outer long brackets....look in the TM 24P, it shows everything you need and part numbers. alot of stuff is on eBay.....also, PM 86humv on this...

No one said the info was useless....the problem is its a must to know what your dealing with....thus the constant mentions of PMD failure...we are here to help, but certain facts are a must. Such as correct make, model and year.

Jeeeeze.....don't remember seeing any mention in the posts that the truck is a Hummer...wrong forum then. while the 92-93 hummer H1 is as close to a HMMWV....you might have better luck on the humvee.net site

First of all...for the 10th time, you guys don't have a PMD. That's on the civ Hummer H1's. now...now pic looks to be some sort of bastardized pump, almost loooks like an M10009 CUCV setup. the hmmwv does not have a vacuum advance s seen in the pic, the hmmwv uses the cable setup along the...

it has all the Armor in the Body..No Slant kit on it, but its a real M1045 per the Original Dataplate still on the Vehicle. Where are you located in Norcal? I am in the Bay Area....Send me your Email and I can get pics....or better yet, come look at it...I highly encourage that. Price is $15000.00

I know of none...I use PWC, its Polyurethane but the green is a shade or 2 off...it says its CARC, but its not...as it come off with Acetone. best bet is to touch up with an Spray gun and use real CARC.

I have an M1045 roling Chassis for Sale in Northern Calif...would make a great Restoration project....Plus I have many many take out parts from another Project that could go with it.