Search results

Sure in the usual location near the forward spring hanger on the front axle driver side.

I think they were made by American Development Corporation, I have a SF97 with mfg date 1983 and vin ADC13D3. EDIT: on second thought the insulated aluminum ones like you have were made by Aero Welding in the early 90's.

99th Regional Readiness Command of the US Army Reserve. Appears to be deactivated. Appears to have been deployed Iraq war. MT typically means maintenance. The NK02HT is the Army registration number, equivalent to a license plate, unfortunately that number does not show up in the database...

If the military did it there will be a rectangular data plate attached to the crankcase giving the bore rods and mains size.

Y’all remember how in high demand these were not to many years ago, even the incomplete ones brought 2 grand.

I think your guess with the tires being out of round is correct.

A master plumber once told me that the purpose of teflon tape or the teflon pipe sealant is to lubricate the threads so you can get the connection tighter.

I say paste. Never seen teflon tape used on trucks.

Flatness comes from finely ground silica sand added to the paint during manufacture. Gillespie does not contain enough of this. When settled out, this flattening agent is nearly half of a gallon can when properly formulated. This is enamel or polyurethane paint. Not sure how the Behr latex...

Rapco’s Gillespie CARC substitute paint is the correct color but nowhere near the correct flatness.

Yeah they exist, Sportsman Guide sold huge numbers of them years ago for like $70 ea.

Watch out you might come back and there will be a little 416 as a result.

One plug and receptacle has matching rubber ribs.

Have you at least changed the oil in the hubs? If when you drain the oil you get filings out that will tell you a lot.

These engines are dying right and left these days. Every week or so someone comes on here telling us their 250 sounds “like a bucket of rocks”. Take out a classified ad on here and sell it.

Welcome. Your engine could be factory new, depot rebuilt, or an engine that was pulled out of a truck due to a fatal flaw. Paint on the engine usually tells the tale. Bright fasteners means new, all black paint everywhere is rebuilt, all black but evidence of being installed means dead. But...

See where it says 55 inches? If you take that length plus the width of the pulley to the auto parts store, they can match it. Sorry I don't have the Dayco number, but this belt is nothing special.

This is the info I have.

Exactly! Ford GM etc are all to happy to sell parts online, why not AM General? Lots of missing parts though, hope they get EVERYTHING on there soon.

The Hertz of each generator needs to be identical to allow paralleling. So if either generator is off a little, you will not be able to parallel. Next, the alternating current waveform has to match between each generator before the transfer can occur, otherwise loads will suffer and the...