Search results

Welcome. VIN is way too many digits. Should be maybe 5. No M38A1s or M38A1Cs were made in the 1970s.

Google "CCKW distributor rotor" there is one on ebay for 6 bucks.

looks like same as CCKW.

Someone just advised they removed the outer wheel bearing and that allowed them to wiggle the hub/drum around to unstick the shoes.

Motor freight will be about $150 if you collect the item at the terminal. Brent Mullins Jeep Parts has new fenders for one side I forget which. Looks like you need both.

Winer Surplus LLC 330-628-4881 has the 5 speed for $595. You won't find a better deal .

Can you count the cylinders again and get back to us. EDIT: OK now we know she's a multifuel. Our newest site sponsor, SOUTHEASTERN EQUIPMENT (SECO) used to rebuild M35A2s and put 4-53 Detroits in them, hence my question.

That is not stock. Need more pics of the entire thing to provide guesses.

Looks incredible! You have the hard to find part, the tailgate!!! What are you looking for? I have a 715 take off parts stash. EDIT: saw your want ad.

that Dynamat product should do that for you.

Do what you want, all that bling can go in the scrap pile in the future when it's time for a proper restoration. Just don't apply that awful rhino coating. I spent a week once removing that rust encapsulating crap from a GPA.

M8/M20 Armored Car made by Ford. Timken axles.

The M105/M35A2 wheels are for 9.00-20 tires and are wider, and may rub on the body. You will have to check to see.

Try Red River Parts and Equipment in New Boston TX.

Sounds like it. Good way to burn up expensive electronics. Suprman always recommends adding secondary ground wire from dash panel to solid ground point.

Hey at least you are in Hawaii, all the trucks are half price there seems like.

Pull the codes. Do you have the Allison book that tells you what the codes mean?

Welcome. That is one nice 715 and an adorable Heeler too!

No I don't. I found the post I was thinking about, the O ring is 15", but no cross section is discussed. You will have to disassemble the wheel again to measure or there is also a new Growler forum unrelated to Steelsoldiers where someone may know. Maybe you can do the dismount next time by...

USF hauled my HMMWV for a great price and everything went super smooth.