Search results

I singled out my M820A2. used Hemtt rims and 14.00/20's. Need 20 budcaps and 20 nuts for the front and that's it.

Actually it looks like my M52A2 which is a 5 ton Multi-fuel.

That just seems like way too much work just to dismount a tire! I know a tire service guy that will come out with his service truck and do the tires right at my location. My SUPER SINGLES project on my M820 5 ton was about $300. That included mounting 6 14.00/20's on new Hemtt rims, removing...

I just used a piece of #14 solid THHN wire and connected the original wire to it. Pulled it through and connected back to the plug on the bottom of the steering column. Stranded wire does not work, it is not stiff enough!

I did mention that any 5 ton multi's harness would work. Kinda selfish of you not to share! :roll:

I called and left my name and number. We'll see how expensive this will be. Custom wiring sounds pricy.

I have been looking at the major parts dealers as well as internet search with no luck finding a replacement front wire harness for my M52A2 restore project. I think any 5 ton multifuel truck wire harness will work. Does anyone have one of these in stock or know where I can get one? I can...

I replaced the frozen kill switch yesterday. It was a real pain! It was hard to reach the location in the dash to install the nut on the back of the switch to secure it to the dash. Then it was hard to get my arm by the power steering column to attach the end of the cable to the IP shut off...

Thank you for your advice and support. This is going to be a slow restore! I can only do a little bit each day do the the HOT and HUMID weather down here. I also need to keep the expense spread out to keep in budget. :grd:

Looks good man. Welcome to the site. Keep the pictures coming. Try to upload the pictures to our server. This way they will always be here with the thread.

Maybe you should attach some tie down points to the plywood you added to hold the cargo cover.

Not much progress on the truck so far. Been busy with other projects and will not commit to major work until I have title in hand. I did order a new kill switch assembly and new horn button rebuild kit from Saturn Surplus. I had removed the frozen cable from the truck and the cut off on the...

Truck looks good! I like the paint job too. I have been busy with Ebay sales and my WMO filtering system. All I did to the truck was install a lock on the boarding ladder and replace some lightbulbs in the instrument panel and the fog lamp. I took the truck out on a 5 hour drive to get a...

I think the question is: Can you afford the fuel?

I would get the one with the 2" ball. The 2" ball is more common.

Why don't you go with a spin on water separation filter?

What oil? I don't see no stinkin oil! :roll:

Yes you can get a wife anywhere but one that can put your lights out Priceless! rofl

All aluminum...wow very nice. Maybe Green stain for the boards but I hate to see you cover up that beautiful aluminum.

I hope to start using it sometimes this week. I ordered the proper hose for connecting the pump unit to the rest of the system. The hose that I used in the pictures is soft as bubble gum and was there for photographing only. The hose I ordered is made with 20% Viton. I ordered it from...