• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. rickf

    Oil pressure safety switch

    I tried Delk's one time for a fuel tank. Guy who answers phone tells me they have them used for 65.00, hollars to someone else who say's yea we got them, who is it? Phone guy replies it is a guy from Jersey, Guy in back says yup, got two of them 75.00 each. Needless to say Delks will be my last...
  2. rickf

    Oil pressure safety switch

    Sorry guy's I just, do not have time to read all the sticky's or go through the classifieds. I have no internet at home and I have limited time I can play at work. I apparently have a bad oil switch. 002A started cutting out yesterday for no obvious reason, bypassed oil switch and have had no...
  3. rickf

    sandy killed my truck help

    You are going to find that four hours under water is about 3 3/4 hours more than fording standards. In salt water at that. You will find that rust is going to form everywhere and very quickly. Anything electrical that was in contact with the salt water will need to be rebuilt or replaced...
  4. rickf

    How can we help Sandy victims?

    I had a "so called" good Samaritan get stuck in my septic drain field trying to drive through my lawn to get around a tree in the road. They were not helping anyone and were not looking to, they were sight seeing! They are lucky they did not get freakin shot since I was in no mood for that crap...
  5. rickf

    Gear vendor vs. 700r4

    700R4 with G/V!! Yee-hawwwww
  6. rickf

    Looking at a m1008 and have som questions,

    The one thing that has not been mentioned here yet is rust. Think rust, lots of rust. You are in NJ, think even more rust! Front fenders and inner fenders, rockers, door and door posts, rear quarter panels and tailgates. I didn't mention the floor because it is probably already an aluminum...
  7. rickf

    Workspace request. Marietta,Smyrna, Ga area.

    Unless you are looking for a helper just find a Wally world parking lot or similar. Rick
  8. rickf

    Well, It's gone.

    I'll Bet you sold it to a guy from the g838, guy named Matt? I know he was looking at one in Kansas. Rick Then again, Matt doesn't have long hair? Maybe not then. Kansas must have a bunch of 715 for sale.
  9. rickf

    AS1729vrc antenna woes

    I think you need to read up on swr a bit, The ratio to look for is 1:1, 1: 5 is bad and 1:0 is impossible. VSWR conversion calculator
  10. rickf

    First M1009 arrived today!!!

    With the parts I am seeing removed from the engine I am guessing the engine is bad. Check that out before going too far. Definitely before putting anything back on. They did not disassemble it for nothing. Put a socket on the front balancer bolt and go back and forth with it and see if the crank...
  11. rickf

    AS1729vrc antenna woes

    Transmitting with no load (broken antenna) may have fried the finals in the transmitter. You need to hook up a dummy load and check to see if it is actually still transmitting. Rick
  12. rickf

    Civil Lawsuit Regarding M109A3

    Does anyone REALLY think that the plaintiff's lawyers and the defendant's lawyers are not friends and fully intend to drag this out until nobody has any money left? The only winners here will be the lawyers and unless you are independently wealthy I can assure you that they have more money to...
  13. rickf

    Rotating Engine Stand Suggestions for 6.2

    A 6.2 is just about the same weight as a big block so the heavy duty ones will work. That said the heavier the better. I put a 502 big block on one of the ones shown with the single runner out to two front wheels, will not do that again. With exhaust manifolds that is a 1000 lb. setup and it...
  14. rickf

    4a032 powered air comp

    I talked to this guy at Gilbert and he did not have any there but he does have them. He told me around 40.00 for them NOS. I have to get in touch with a friend of mine who knows him and will have his number. Rick
  15. rickf

    4a032 powered air comp

    I had a guys card but lost it. I need one for mine also, I will make a couple of calls and get his name and number. The carbs are out there and price is not bad. Rick
  16. rickf

    locker noise

    Fact of the matter is this, they act like an open rear until one wheel spins up and then the governor applies pressure to engage the teeth on the side clutch plates. The big problem is when someone stomps the pedal and one tire immediately spins up to 40 or 50 mph and then the governor kicks in...
  17. rickf

    locker noise

    I would suggest you pull the diff cover and see what is there. Dirty oil is a given but any metal filings or chunks means you caught it before it let you down on the highway. 10 bolt rears are a dime a dozen so if it is bad you should be able to find another for 100.00 or less. Look for one with...
  18. rickf

    locker noise

    OK, Let's figure out what you have in there first. Did you buy this truck from G/L or private? If it is jacked up both rear wheels in the air and in neutral, turn one wheel fairly quickly which way does the other one go? If you hold one wheel and turn the other does the driveshaft turn or is it...
  19. rickf

    locker noise

    I hate to tell you this but you should not hear a gov-loc at all! What are you hearing? What kind of sound? Those Gov-loc's tended to hand grenade if you spun one wheel to fast before they had a chance to engage. I have seen a lot of them come right through the diff cover. Rick
  20. rickf

    Anyone have a rod bolt they could loan me or know their measurements?

    You guys are talking about all different bolts and even different lengths. I am not all that well versed on the multifuel but I have built a couple hundred engines in my years as a mechanic. Has anyone thought about the weight difference of the bolts and the effects of that on the big end of the...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks