Search results

Sounds like an air leak. Super bad for injection system.

Same wheel as M101 trailer or M37 Dodge. There are wheels made for that trailer that are for tubeless tires.

Use search term "refuses" in the FMTV forum for a discussion on what is located there. Thread started by NDT.

Did you try pressurizing the fuel tank like the HEMMTs.

I thought I knew a lot about flood rescue work having worked TS Claudette as a teenager in a M37 Dodge for Galveston County Civil Defense. Some random thoughts: Harvey was a humbling experience that did not go well for a lot of agencies. I recall meeting with our command staff (FD)on August...

I had this issue on a CUCV. You will need to have someone press the button to cause the fault condition while you probe around with a voltmeter to see where you are loosing the voltage. In my case, a crimped on cable end had corroded between the cable and terminal, and would only conduct power...

If you can crimp the tubes, you do not have to remove the radiator. Eastern Surplus lists having the clutch.

Google lists 3 rad shops in Ventura: Lee's 805-648-6939, Jessie's 805-652-2193, Ventura Rad 805-643-4880. I would try to crimp the damaged tubes to stop the leak. You can then continue on without the hose to a Napa at 4547 Telephone road and obtain hose and fittings to make a new hose assy...

I would start by disassembling all the battery terminals and cleaning and inspecting the terminals and cable ends.

Installing the third member assembly as available from Eastern can be done by any mechanic.

Very few shops understand setting up the wheel end spider gears properly. If you guess the gear lash, they will grind and rumble and self-destruct. The wheel ends have to come apart to change the front differential. Also, lately, the surplus high speed ring and pinion gears are dried up, you...

If the CCKW pressure plate bolts to it and the recess for the pilot bushing is the same, that may work fine.

All three.

Welcome. I highly recommend MTP Drivetrain in Many, LA for #1 and 3.

Ouch. Here is why this happened. People have been buying Humvees (also made by AM General) that are title branded "off road use", then "washing" the titles to remove the brand. Various states have figured this out, and have flagged anything made by AM General as off road only unless the owner...

I needed a 6 bolt hole 270/302 GMC flywheel back in the 80's and it was hard to find then.

No. Clutch has to have bolting surface and friction surface.

Who sells the pvc pipe beadlocks ready to use? Or do we just buy some 16" schedule 80 pipe and cut it?

Gorgeous Jimmy, fugly Volvo.

He's in Hawaii hence the rust. Only place worse for rust is Guam.