• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Tinstar

    Surplus Fluke 27/FM Multimeters

    I did a search to see if this was already covered but nothing showed up. Surplus Fluke multimeters built for the military are on fleabay. Fluke 27/FM (fluke military) excellent meters for good prices OD green cases and all. Some yellow. Most auctions have all accessories and manuals...
  2. Tinstar

    Ft. Hood How many left??

    Already have a M1008 In market for solid M1009 Ft Hood is easiest for recovery. Looked at the forestry and other sites and all their stuff is really rough I don't mind a challenge but those are too far gone for me unless I missed the good one (s). The one I picked up from ft hood was rust...
  3. Tinstar

    Ft. Hood How many left??

    Any luck?!
  4. Tinstar

    Ft. Hood How many left??

    Thank you very much!
  5. Tinstar

    Ft. Hood How many left??

    Anyone recovered an item at Ft. Hood recently? How many CUCV's are left there? Mainly M1009's I was last there on 9/11 (Phantom LZ) and I counted about 20. About a 50/50 mix of trucks and blazers. I don't know if they have them shipped in or have them stored elsewhere. I saw three on Google...
  6. Tinstar

    M1010 weird hum & vibration from motor

    Amazon has a AC Delco HB for just over $90 Mine "looked" fine while on the truck, but once off you could see where it was dry and cracked. Really glad I took the SS members advice To change it because of age and not appearance. Make sure you have the gasket installed between the air filter...
  7. Tinstar

    CUCV no start.

    +1 i didn't attempt start (M1008A1) for a month while things were replaced and fixed and TM's poured over. Others wth way more knowledge on CUCV's will help you with the issue One of the many things that was and is very helpful are the old posts. Do a search or just start reading old...
  8. Tinstar

    M1008A1 front driveshaft dust boot

    Just need the boot
  9. Tinstar

    M1008A1 front driveshaft dust boot

    Fleet pride here in OKC has no clue unless I bring it to them
  10. Tinstar

    M1008A1 front driveshaft dust boot

    Yes all out my driveshaft place needs the ID of boot or OD of shaft don't want to cut it off right now because of dirt and mud Cant fine the specs of the shaft itself Part numbers yes Specs no
  11. Tinstar

    M1008A1 front driveshaft dust boot

    So did I brings up all the gm parts places problem is NO ONE stocks/has it anymore discontinued part
  12. Tinstar

    M1008A1 front driveshaft dust boot

    Where can I find one??!! Anyone know the front shaft OD or a replacement boot #? The TM shows part #7845127 Did a web search with part number in the TM No luck Searched SS site No luck Called Spicer nothing crosses to spicer number and they have about 20 different dust boots Gave them...
  13. Tinstar

    M1008 shocks

    Shockwarehouse.com Bilstein shocks are great. Have them on everything I own
  14. Tinstar

    M1008 No Start After Spin On Filter Fuel Filter Conversion and New Injection Pump

    Had same problem. Pressurized tank a little and bingo! Fuel flowing again Engine started right up after that.
  15. Tinstar

    Cucv upgrades.

    And just as important as the DH relay mod, etc. already listed
  16. Tinstar

    Cucv upgrades.

    Don't forget to replace the harmonic balancer
  17. Tinstar

    Sherman-Williams CARC. Where in OKC, OK to buy?

    Disregard Found it
  18. Tinstar

    Sherman-Williams CARC. Where in OKC, OK to buy?

    One or two gallons for a M1008 repaint?
  19. Tinstar

    Sherman-Williams CARC. Where in OKC, OK to buy?

    Perfect! Thank you!!
  20. Tinstar

    Sherman-Williams CARC. Where in OKC, OK to buy?

    Which is the reason for this post ! Thanks for the spelling tip I hate auto correct and missed that.
Top