Search results

THIS IS NOT A WANT OR FOR SALE AD I want to sell my M1009 because the injection pump is leaking and i don't want to spend the money on it anymore. It has a new water pump, new lower and upper radiator hose, oil pan and freeze plug heater, new glow plugs about 8 months ago, new starter less than...

I was asked to do a write up about how to swap in a electric fuel pump, so here it goes. I was having problems with the fuel draining back down the fuel line when the vehicle was left on a flat ground or when the front of the vehicle was higher than the back. To help when cold starting in the...

Does anybody know of a good alternator rebuilt kid? my bearings on the drivers side alternator are going bad and i figure that i might as well rebuild the alternator, since i know how to but i have no idea where to buy the kit. Thanks

Today i went outside to get something from the M1009 and there was a puddle of coolant about 7 inches by 11 inches, opened the hood and didn't see any obvious leaking, but the coiling fan was loose the the assembly including the belt pulleys it moved about 1/8 inches. could this be a bad pump or...

I'm going to replace all the vacuum lines on my M1009. What size are they? And about what length do I need? P.S. I have the TH400

Does anybody know of a good online cb shop that dosen't charge a arm and a leg for shipping. i am looking for a Wilson 5 foot fiberglass, and mounting base as well as cables, and connectors? Thanks

My dash pad is in very bad shape (like most), when i checked with a local GM dealer to see how much a new one was, it was $675, so i looked at LMC Truck and i found this (Middle Product) LMC Truck Parts - Page 96 I worked great, it fits awesome, and is alot cheaper around $44.95

I have a M1009 and when i bought the vehicle i had the U joints replaced and they were just replaced again today, 6,500 miles later, does this seem odd? What causes a U joint to fail early? The shop that replaced them both times is a reputable shop and we have been going there 20+ years, with...

Im going to using a vinyl spray paint to redo my dash, but i need something to cover up the low spots, does anybody know of any way to do this, maybe eboxy? Thanks

Does anybody know where in the manuals it says how to remove the dash pad, i looked but can't find it

While i was hooking up a 12 volt power outlet (cigarette lighter) i found a light under the dash by the passenger side, its mounted there for something but i have no idea what, any ideas?

What are the best brand for dashboard speakers for a M1009, i know that they are 3 1/2", but i want a brand that will sound good, i have been looking at these Amazon.com: Kenwood KFC-835C 40-Watt 3.5-Inch Round Speaker System: Automotive Amazon.com: Pioneer TS-A878 3 1/2 Inch 2-Way Speakers...

I want to put a bed liner in my CUCV M1009, i am wondering what your experiences are with different brands. post pics, and opinions, and overall experiences. I have been looking at Rust-oleum bed coating it is less than $50 for a 1 gallon can.

When i went to the parts store to buy a new starter they didnt have a 24 volt starter, what happens if you install a 12 volt starter on a 24 volt system

how should the batterys be hooked up in a stock system? mine are hooked up back battery positive to front battery positive, then the same for the negitive then front battery negitive to ground Thanks

Here is the info I posted in "Upcoming Events" http://www.steelsoldiers.com/upcoming-events/54891-th-annual-military-vehicle-show-swap-meet-clare-mi.html

For a couple of months now i have been looking for back seats in my M1009, I have checked ALL the salvage yards around me and no luck. Does anybody know where to buy back seats new or used, also would any seats from a mid or late 80's Chevy suburban fit? or any other vehicle? Thanks

Has anybody added a trans cooler to thier CUCV, I have a M1009 and i want to add one and im wondering what brand you used and cost Thanks

I was just at orielly auto parts today and i just wanted to let everybody know that they sell the holder that the bulb goes into then goes into the instrument cluster, they were 3.99 each.

I have a door dent on my M1009 passengers side, i was wondering if anybody knows how to remove the door panel i tried but was not sucessfull, or anyother idea to remove the dent Thanks