• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. ClockworkSkin

    M1009 tailgate window stuck down, need to find a way to repair crank internals

    I have the panel off of the tailgate. I'm fairly certain my crank handle clutch needs replaced but before I can do that I have to figure out how to get the window back up. The window was rolled down when whatever part it was that failed, failed. I cannot find a way inside the tailgate to...
  2. ClockworkSkin

    Advice on part location, air control valve internal washer

    I had a leaking air hose under the dash. I was able to find and replace the hose (part # 8741776) that goes to the air control valve that engages the 6x6 (part # 16B1582726). In trying to find the leak I had the whole assembly apart to tape all of the threads. Also in doing so I had the...
  3. ClockworkSkin

    Look for the glass plunger inside the IP return fitting

    My truck has once again left me on the side of the road. I hadn't had it running in a couple of weeks but it started up without hesitation. A short drive to school ended short when the engine started to slow. I pressed the pedal down more and more to the point that it was floored. The truck...
  4. ClockworkSkin

    Looking for advice on Glow Plug Relays

    I recently burned through a set of glow plugs in a week. Without getting into the backstory, here is where I'm at. New set of plugs installed right now. New terminal ends on all 8 wires. The wires are currently disconnected. I want to make sure that everything is good to go with the...
  5. ClockworkSkin

    Stalled and will not start again, Please Help!!

    I've been having electrical problems with my 1009 This thread chronicles those problems. http://www.steelsoldiers.com/cucv/38116-electrical-question-starter-voltmeter.html Today, I refueled and left the house. I got about 5 miles away and it stalled. I couldn't get it to restart. I bled...
  6. ClockworkSkin

    Electrical question, starter/voltmeter

    I have a 1009 (24v) that won't start. The voltmeter is in the yellow. I can hear the clicking of the solenoid, but when I turn the key to the start position, I just get a click (I think coming from the starter). I've spent quite some time both on this forum and in the TMs and I'm lost...
  7. ClockworkSkin

    What is the best way to get a title in someone elses name (PA)?

    I have been browsing this section of the forum for an hour or so now and I'm still unclear what the best approach to this problem is. I recently got an M35 and I'm now ready to sell it. I did not get the SF97 because I had the intent of selling it when I got it. My question, is there a way to...
  8. ClockworkSkin

    Shipping parts to other countries

    I listed an old starter for my CUCV on EBay. I got a bid in the first hour or so. Upon looking into it, the guy is from Italy. Is there any type of restriction preventing me from sending this internationally? I searched the forum and couldn't find anything, and when I use Google I'm afraid...
  9. ClockworkSkin

    Please identify this part

    I replaced the vacuum hose and it fixed my shifting woes. However this rubber piece is also dry rotted and I'm not sure what the part is, or more importantly where I can find a replacement. Can anyone help?
  10. ClockworkSkin

    Coolant Return Reservoir & CINGCARS Radio Tray

    I am looking for a replacement coolant return reservoir tank. Mine is cracked at the bottom (will not hold coolant), and the tab on the top is broken. I cannot find a place to order a new one. Can anyone point me in the right direction? Also, I have a radio table/mount from the rear...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks