Csm Davis
Well-known member
- 4,166
- 393
- 83
- Location
- Hattiesburg, Mississippi
I forgot to check at the lot might can find you a hanger bearing
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
2016 la rally swap, buy, sell, wanted tread
- Thread starter timntrucks
- Start date
Csm Davis
Well-known member
- 4,166
- 393
- 83
- Location
- Hattiesburg, Mississippi
Oh yeah I have the proper acetylene tanks for the wreckers some just show some refillable
Csm Davis
Well-known member
- 4,166
- 393
- 83
- Location
- Hattiesburg, Mississippi
Found you a hanger bearing Marty. Sorry bud it was wrong one. Should be able to get a new one from driveshaft shop I used to work at.
Last edited:
profo
Active member
- 428
- 73
- 28
- Location
- jeanerette,la
you got them I will bring for rally also the altenators are 130 amp my eyes are going bad!
Marty
Marty
profo
Active member
- 428
- 73
- 28
- Location
- jeanerette,la
It looks like this and has about 9 inches in the bolt hole pattern.
profo
Active member
- 428
- 73
- 28
- Location
- jeanerette,la
CSM are you asking me if I found one are did you find one, I need one if you got one. I sent you some pictures.
Thanks Marty
Csm Davis
Well-known member
- 4,166
- 393
- 83
- Location
- Hattiesburg, Mississippi
Last edited:
profo
Active member
- 428
- 73
- 28
- Location
- jeanerette,la
Brining the m with me when I come. Marty
- 5,614
- 2,922
- 113
- Location
- Metairie/La (N'awlins)
Just a note that I have a free pay it forward 10 hole bud wheel with a 25% ndt, flap and tube for a 5 ton or 10 lug trailer.
Tire holds air and would make a good spare or off road farm trailer.
Will only bring to rally with a firm commitment.
Tire holds air and would make a good spare or off road farm trailer.
Will only bring to rally with a firm commitment.
goldneagle
Well-known member
- 4,510
- 1,008
- 113
- Location
- Slidell, LA
Looks like I ended up with some Kipper Tool Boxes with tools. 3 different variants. One is complete and new or near new. Said Battery Shop on box. Have a few mode in different stages of completeness. Let me know if any interest. Also have some empty drawers and parts for the kits.
- 4,038
- 119
- 63
- Location
- Ponchatoula LA
i also have a 900 tire in good shape, light switch, m3 kitchen burners, glow plug card, cold weather sleeping bag, 101 fiberglass rails set.
profo
Active member
- 428
- 73
- 28
- Location
- jeanerette,la
profo
Active member
- 428
- 73
- 28
- Location
- jeanerette,la
Is the light switch the standard MV type mine broke in the M4K forklift cant turn the headlights on. its the same as in my deuce and 5 ton.
Marty
HanksDeuce
Well-known member
- 1,081
- 242
- 63
- Location
- Prairieville, LA
Looking for a cheap rim to fit an existing 16R20 Michelin XZL tire to make a swing for kids. No o-ring needed.
goldneagle
Well-known member
- 4,510
- 1,008
- 113
- Location
- Slidell, LA
That would be a lot of weight to swing around! Could kill someone.... Maybe I just can't picture the setup.... i do have two MRAP rims. Make me an offer...
goldneagle
Well-known member
- 4,510
- 1,008
- 113
- Location
- Slidell, LA
I will have (4) NOS 9.00-20 Titan Hawks NDT tires. Also (22) NOS 11.00-20 Titan Hawks NDT tires available. $100 each.
profo
Active member
- 428
- 73
- 28
- Location
- jeanerette,la
if I got room in trailer will give you one or two got dem laying all over the darn place and keep busting my toes on them.
- 4,038
- 119
- 63
- Location
- Ponchatoula LA
looked today marty and that is not a light switch its a blinker.. i do have a light switch that is missing the handles if you want to try it out you can have it
profo
Active member
- 428
- 73
- 28
- Location
- jeanerette,la
how bout a few MBU compressors for swap!
Also looking for a decent front jack for a m105 trailer mines capult!! anybody got one!
Last edited:
camnite
New member
- 67
- 0
- 0
- Location
- Mobile, AL
needing two 9x20 ndt's if anyone's got them