saltydeuce
Active member
- 167
- 37
- 28
- Location
- west covina california
When is everyone leaving would like to caravan out with someonek
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
2016 SoCal Spring Rally
- Thread starter FASTNOVA
- Start date
- 1,093
- 146
- 63
- Location
- Los Angeles,Ca
There's a nice pile, but that only looks like a day's worth of firewood. What about the rest of the weekend?
I'm leaving Thursday around noon. I know Gripy likes to get there early just so no one can see him changing out of his dress.
Last edited:
saltydeuce
Active member
- 167
- 37
- 28
- Location
- west covina california
Maybe I can pull that off and follow you out fast Nova. Don't want to get lost again. U driving the 5 ton out?
- 1,093
- 146
- 63
- Location
- Los Angeles,Ca
Yeah, I'm taking out Brutus. If you want we can stop by your place and load up my truck with the firewood.
Last edited:
saltydeuce
Active member
- 167
- 37
- 28
- Location
- west covina california
That sounds good when u want to load up. We can do it they day we leave or whenever is good for you. I'll text you my address
Gripy
Member
- 398
- 3
- 18
- Location
- Los Angeles, CA
I'm good on wood. I found a bunch in the Palisades. I guess rich people don't like wood.
On another note I need a new fuel tank. the filler neck is cracked all the way around and wiggles up and down.
On another note I need a new fuel tank. the filler neck is cracked all the way around and wiggles up and down.
Last edited:
- 1,093
- 146
- 63
- Location
- Los Angeles,Ca
Ever try that 2 part epoxy stuff.
True Knight
Active member
- 673
- 179
- 43
- Location
- San Pedro, CA
That's an easy job. Just weld the crack closed! Ha ha ha
DISCLAIMER: DON'T WELD ON FUEL TANKS
BnaditCorps
Member
- 479
- 1
- 18
- Location
- Solano County, California
Doesn't look like i can make it to this one, I'll try for next time.
That will end exceptionally well! *sarcasm*
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
- 695
- 53
- 28
- Location
- Palm Springs, Ca
Will try to make this one, if not I'll be at the fall meet. Just a few things left to do to the truck mechanically before I gut the insides and do the Combat Camper Redux
armytruck63
Active member
- 1,663
- 10
- 38
- Location
- Redlands, CA
There actually are safe ways to weld up fuel tanks, and the fact that we're dealing with diesel fuel instead of gasoline is a huge help.
Old timers used to empty and pull the tank and then run a hose from the exhaust of another running vehicle into the tank to displace any dangerous fumes while they weld on it.
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
Some WWII history of the Panzer Corps i read mentioned one of the major differences between German armor and ours (U.S.) was fuel; Germany had decided to go diesel. Apparently the Sherman M-4's had a nickname among G.I.'s. They were referred to as "Ronsons", and you can guess why.
Last edited:
NovacaineFix
Member
- 662
- 1
- 18
- Location
- San Diego, California
There is a guy who I believe is a SS member as well, that shows how to weld using your 24 volt electrical from your MV.
Now the fact that it is a fuel neck makes things a little more difficult, but we are dealing with diesel instead of gasoline, just like armytrucks stated.
Steve, how big is the crack? Can you pull the filler neck out so it can be brazed? Brazing should offer enough strength and sealing to make it work.
Also is it the military 3" neck or a civi 1 7/8" neck? If it is a civi version, one can be swapped out with a quick visit to the local scrap yard.
anyway, here is that video:
https://www.youtube.com/watch?v=b3vs7WCtRWE
Now the fact that it is a fuel neck makes things a little more difficult, but we are dealing with diesel instead of gasoline, just like armytrucks stated.
Steve, how big is the crack? Can you pull the filler neck out so it can be brazed? Brazing should offer enough strength and sealing to make it work.
Also is it the military 3" neck or a civi 1 7/8" neck? If it is a civi version, one can be swapped out with a quick visit to the local scrap yard.
anyway, here is that video:
https://www.youtube.com/watch?v=b3vs7WCtRWE
True Knight
Active member
- 673
- 179
- 43
- Location
- San Pedro, CA
It's Gripy's truck- and he said he found a new one locally for cheap so he's going to swap em out.
NovacaineFix
Member
- 662
- 1
- 18
- Location
- San Diego, California
Ahh...for some reason I guess I got the replies mixed up and thought it was yours.
All is good, no one died.......this time
All is good, no one died.......this time
- 1,093
- 146
- 63
- Location
- Los Angeles,Ca
Getting stuff ready for the trip and I'm trying not to do things last minute. The fuel shut off solenoid was shorting out on Brutus and out of pure laziness I put off replacing the fuel shut off solenoid even though it is easy to do I would just use the emergency shut down to turn off the engine. I replaced the solenoid, but now when I crank the engine the plunger on the solenoid won't go in unless I push it in manually as I'm cranking. Time to whip out the old test light. Got to love the electrical problems.
offroadrunner
Active member
- 100
- 31
- 28
- Location
- Huntington Beach, CA
Daniel, that's usually the "starter-relay" (at least that's what it was on my '97 Ram 2500); on the Dodge, that's clustered with the (other) relay that holds the fuel-rod in the operating position - once the starter-relay has energized the solenoid into that position (while you're holding the key - or start-button - in the start position). Both relays must operate for it to start and continue running. Some guys (in the Dodge-Cummins forum) just replace that solenoid with a mechanical cable - because it's fairly common for either the solenoid or the starter-relay to fail - and they ain't cheap.
Cheers,
Cheers,
- 1,093
- 146
- 63
- Location
- Los Angeles,Ca
Do the 5 tons have a relay for that? I haven't been home to do trouble shooting.
Last edited:
offroadrunner
Active member
- 100
- 31
- 28
- Location
- Huntington Beach, CA
I dunno - I just assume it's similar to my (P-pump) diesel in my Dodge. The "start" solenoid pulls a healthy amount of current (to move the fuel-park-rod), so I assume they'd run that through a relay rather than just through a switch alone. The one to hold it there - in the "run" position - takes less current to do that, so maybe? not on that one. (Edit: Of course with 24 volts - it would be half the amps, so maybe? they get away with just using a really beefy switch?)
Good luck,
Last edited: