yes, but it will be an offroad led light bar, might add a siren though, I love the sound of the classic "prison escape" siren
For mine, I pulled all the strobes out and modified the forward-firing reflector cups to accept some HID lamps. For the angled reflectors on each outer end I drilled a hole in the center and installed the bulb holders from some cheapo off-road lights and installed 55watt H3 bulbs. On the back I installed some amber LED gangs with a wig-wag controller.
So facing the front there are six 35watt HID. Front quarters have 55watt H3 bulbs (may upgrade at some point). To the sides I left the stock alley lights, which I believe are 55watt halogen bulbs.
I considered stripping all the reflectors out of the bar altogether and just installing a LED bar inside, so it would still have the police lightbar look with the brightness of the LEDs, but the 48” LED bars are $ome big buck$ still.
The lightbar is very bright, and lights up the entire area in front and to the sides of the truck for about as far as the headlights shine. I have two 450watt landing lights going in the grill shortly for long distance lighting.
Of course, over the top of the lightbar is one of the two PA/siren speakers, there’s another square one in the grill. My siren has two 100watt outputs, so the air horn function of the siren is seriously loud.
There are a few ideas for you.