Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
The slide-out tray under the port-side cabinets is a sweet feature:
- Any special reason for it, or is it just one of the many excellent work surfaces you cleverly included?!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Another M1010 owner
- Thread starter Mad Texan
- Start date
- Any special reason for it, or is it just one of the many excellent work surfaces you cleverly included?!
- 657
- 1,150
- 93
- Location
- Chester County, PA
It's just another place to be able to set things down on... or maybe a diving board
- 657
- 1,150
- 93
- Location
- Chester County, PA
I got another delivery from down under! I’d been debating this purchase for a while and finally decided to pull the trigger. I also got the insulated door, a deep pan with trivet and a ‘pizza’ tray. It’s their 24v version so no issues with power (6 amps). I moved where I was going to originally going to mount it already. 
Should be in soon. Doing some test fitting, I originally intended to put the Travel Buddy under the wall cabinet but, I didn’t like it there. I finally decided I liked it over the window and it keeps the counter open. 
#M1010 #cucv #travelbuddy #somervillemetalworks
Should be in soon. Doing some test fitting, I originally intended to put the Travel Buddy under the wall cabinet but, I didn’t like it there. I finally decided I liked it over the window and it keeps the counter open. #M1010 #cucv #travelbuddy #somervillemetalworksAttachments
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
- 657
- 1,150
- 93
- Location
- Chester County, PA
I found it on FB originally and started reading reviews about it. It seems like a good alternative to cook food and have a hot meal much like a crock pot. There are some groups that share recipes...
- 657
- 1,150
- 93
- Location
- Chester County, PA
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
Mad Texan, you are the King O' Klamps, that's for sure.
I don't think you could fit ONE more clamp on that box for all the money in the world!
- 657
- 1,150
- 93
- Location
- Chester County, PA
Just making sure it stays square...
- 657
- 1,150
- 93
- Location
- Chester County, PA
and supplies for the toilet 
. Another thing off the list! 
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
There's an old saying about the difference between a carpenter and a cabinetmaker:
- A Carpenter owns (2) Clamps
- A Cabinetmaker owns (200)
- 657
- 1,150
- 93
- Location
- Chester County, PA
I thought it was old people need a lot of clamps to hold their $hit together...There's an old saying about the difference between a carpenter and a cabinetmaker:
- A Carpenter owns (2) Clamps
- A Cabinetmaker owns (200)
- 657
- 1,150
- 93
- Location
- Chester County, PA
I've been happy with the install of my stereo but it was missing something. I ended up adding some kick panels from @cheyennepickup and some @kickeraudio KS speakers to fully use the @sonycaraudiousa head units 200W amp. Much fuller sound in the cab now with 6x9's in the rear and 5 1/4's in the front. I forgot to add that the e-brake clears the kick panel. #M1010 #cucv
#M1010 #cucvAttachments
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
Mad Texan, you look to be rockin' with some SERIOUS sound right there!
"Live at Filmore East", or what else might be your favorite jams?
Bagpipe tatoos?! Funkadelic?!!
- 657
- 1,150
- 93
- Location
- Chester County, PA
It's funny how simple the systems are in this build. The head unit is the key piece with a built in amp with 45w RMS x 4. I used the same one in the cab and box.
Music wise... I'm all over the place yet should probably expand more.
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
- 657
- 1,150
- 93
- Location
- Chester County, PA
I'll check her out!
- 657
- 1,150
- 93
- Location
- Chester County, PA
It’s been a while… been dreading this project. 
Let the fireworks 
begin. Fixing the rear main, removed the driveshafts, TH00 been peeing on the parking pad. Time for a change, bolt action time! Not a lot of pics… old pan seemed to be seeping at the rubber seal as well as the rear main seeping as well. Pulled the oil pump and rear crank cap and was amazed the rope seal just pulled out. Installed the new rubber seal in it’s place, wiped off the bearing, slathered it with assembly lube, and started torquing it back together. Installed a new pan with ‘RightStuff’ and installed all those little 10mm pan bolts and got a nice squish all the way around. Reinstalled the dipstick. I’m going to let her set up before adding oil. Hard job to do many pics because your hands are dirty the whole time… 
. #M1010 #cucv
Let the fireworks begin. Fixing the rear main, removed the driveshafts, TH00 been peeing on the parking pad. Time for a change, bolt action time! Not a lot of pics… old pan seemed to be seeping at the rubber seal as well as the rear main seeping as well. Pulled the oil pump and rear crank cap and was amazed the rope seal just pulled out. Installed the new rubber seal in it’s place, wiped off the bearing, slathered it with assembly lube, and started torquing it back together. Installed a new pan with ‘RightStuff’ and installed all those little 10mm pan bolts and got a nice squish all the way around. Reinstalled the dipstick. I’m going to let her set up before adding oil. Hard job to do many pics because your hands are dirty the whole time… . #M1010 #cucvAttachments
2INSANE
Well-known member
- 725
- 824
- 93
- Location
- Belgrade, Montana
Nice job refurbishing the pan! The dual exhaust is sexy too! ORD motor mounts?It’s been a while… been dreading this project.
- 657
- 1,150
- 93
- Location
- Chester County, PA
I can’t say I refurbished it, it was new.
Thanks on the exhaust, I used a dynomax kit.They are DIY4X mounts.
- 657
- 1,150
- 93
- Location
- Chester County, PA
in the process. 
