Aussie Bloke
Well-known member
- 725
- 373
- 63
- Location
- Lost, out bush in OZ
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What did you do to your deuce this week?
- Thread starter Seth_O
- Start date
- 6,555
- 13,939
- 113
- Location
- Hawthorne, NV.
Replacing my external electric fuel pump with a new one after 10 years, along with the primary and secondary fuel filters.
- 4,299
- 3,132
- 113
- Location
- Fort Worth, Texas
I received this M35A2 w/w from Jeepsinker yesterday after he went through the truck. 2008 rebuilt engine, G177 tires, air-assist steering, peashooter brake lines, and more. All it needs is A/C and it may be a decent commuter vehicle. 
I plan to get it painted and spiffed up.
I plan to get it painted and spiffed up.Attachments
- 2,053
- 2,949
- 113
- Location
- Florence, SC
Good looking truck!I received this M35A2 w/w from Jeepsinker yesterday after he went through the truck. 2008 rebuilt engine, G177 tires, air-assist steering, peashooter brake lines, and more. All it needs is A/C and it may be a decent commuter vehicle.
the buddah
Member
- 83
- 1
- 8
- Location
- ocklawaha,fla
Will be doing an overhaul of the brakes and time to change the A3 bearings to A2 bearings in each rear axles
Purchased some short winch mount bolts, and I need Long winch mount bolts, anyone have (6) good used ones or 6 new ones?
Also made some more progress in the yard, clearing it out to put up a privacy fence any maybe something to park the toys under
Sent from my iPhone using Tapatalk
Also made some more progress in the yard, clearing it out to put up a privacy fence any maybe something to park the toys under
Sent from my iPhone using Tapatalk
Firehound
Active member
- 178
- 103
- 43
- Location
- New Caney, TX
Well, I have a decent report... Since I've been busy for a while I'll back track to last Friday.
Big Iron 1-7 report:
Friday- took it to a local pop-up car show. Was talking to a guy who has 5 tons. He said he had some seats, tarps and bows rotting away at his shop, and to come get them.
Saturday- recover a stuck dump truck. Rolled up just in time to see it get out with the help of a backhoe and skid loader.
Sunday- recovered a pickup that was sunk to the frame. Had to snatch in 2nd/Low but he came on out!
Monday- head up to retrieve said bows and tarps. (Seems to be enough bows for 5-6 trucks, although not all are serviceable. Almost all of the wood needs to be replaced. The seats and backs are in good shape. The canvas tarps are too far gone. May be usable as patterns.
Tuesday-Friday nothing to report.
Saturday- moved out of shed and offloaded tarps and bows. Have 3 sets of bows set aside than are already spoken for. Will sort the remaining parts when time allows.
Saturday night/Sunday morning Recover a fellow M35A2 that got sunk in the mud recovering his neighbor's horse trailer.
Sunday- Recover M35A2 from a shop to its place at the LSTF MotorPool. 12 mile run on a towbar. Big Iron 1-7 performed admirably. Drooled over the "niceties" on the dead truck. (ICS, air assist steering, winch... all in good time!!)
Big Iron 1-7 report:
Friday- took it to a local pop-up car show. Was talking to a guy who has 5 tons. He said he had some seats, tarps and bows rotting away at his shop, and to come get them.
Saturday- recover a stuck dump truck. Rolled up just in time to see it get out with the help of a backhoe and skid loader.
Sunday- recovered a pickup that was sunk to the frame. Had to snatch in 2nd/Low but he came on out!
Monday- head up to retrieve said bows and tarps. (Seems to be enough bows for 5-6 trucks, although not all are serviceable. Almost all of the wood needs to be replaced. The seats and backs are in good shape. The canvas tarps are too far gone. May be usable as patterns.
Tuesday-Friday nothing to report.
Saturday- moved out of shed and offloaded tarps and bows. Have 3 sets of bows set aside than are already spoken for. Will sort the remaining parts when time allows.
Saturday night/Sunday morning Recover a fellow M35A2 that got sunk in the mud recovering his neighbor's horse trailer.
Sunday- Recover M35A2 from a shop to its place at the LSTF MotorPool. 12 mile run on a towbar. Big Iron 1-7 performed admirably. Drooled over the "niceties" on the dead truck. (ICS, air assist steering, winch... all in good time!!)
Attachments
Got my winch working about 2 weeks ago.
I'd say the truck has been nearly twice as useful ever since. I've been using it regularly for winching out large trees from deep in the woods, and even got to use it yesterday to winch a plow truck off of its frame rails and out of the ditch.
Also finally replaced the nearly un-usable side mirrors with some updated ones.
Brought the truck back into the shop today for another fluid check up and to replace the parking brake cable.
Beyond that, nothing to report.
I'd say the truck has been nearly twice as useful ever since. I've been using it regularly for winching out large trees from deep in the woods, and even got to use it yesterday to winch a plow truck off of its frame rails and out of the ditch.
Also finally replaced the nearly un-usable side mirrors with some updated ones.
Brought the truck back into the shop today for another fluid check up and to replace the parking brake cable.
Beyond that, nothing to report.
Attachments
- 2,053
- 2,949
- 113
- Location
- Florence, SC
Been busy as hell with work lately, but got a few things done today. I was able to get both engine bay side panels cleaned up & repainted, also got the driver's side wiper motor replaced too...
Attachments
- 6,555
- 13,939
- 113
- Location
- Hawthorne, NV.
Finished replacing the external fuel pump and it works fine with no leaks. Then I black electrical taped the wires and gave it a coat of Woodland Green. Tomorrow it's fuel filter time. SCM35A2 after the fuel filters I need to replace my drivers side wiper motor as well. 
Last edited:
- 6,069
- 4,435
- 113
A couple of years ago my buddy went to recover a stuck truck for an acquaintance. F150.
He yanked on it in low range reverse and broke the output shaft on his deuce's transmission. His deuce went home on towbars and has sat ever since.
This weekend we got the opportunity to swap out the broken transmission for a good takeout.
We used 2 days to do it, probably 5 hours per day. Leisurely careful pace. Day one we pulled all the ancillary stuff and dropped the transmission.
Day two we drove the redtruck over to the parts truck and pulled the transplantable transmission and installed it.
Today we put the seats back in and went for a test drive. This is one of the better deuces I've seen. Airforce truck, dual circuit brakes. We put the 395s and MRAP rims on it shortly before he broke the output shaft. We suspect the improved traction of the 395s may have contributed to the failure.
I'm glad to see it crawling around under its own power again.
He yanked on it in low range reverse and broke the output shaft on his deuce's transmission. His deuce went home on towbars and has sat ever since.
This weekend we got the opportunity to swap out the broken transmission for a good takeout.
We used 2 days to do it, probably 5 hours per day. Leisurely careful pace. Day one we pulled all the ancillary stuff and dropped the transmission.
Day two we drove the redtruck over to the parts truck and pulled the transplantable transmission and installed it.
Today we put the seats back in and went for a test drive. This is one of the better deuces I've seen. Airforce truck, dual circuit brakes. We put the 395s and MRAP rims on it shortly before he broke the output shaft. We suspect the improved traction of the 395s may have contributed to the failure.
I'm glad to see it crawling around under its own power again.
Attachments
- 4,299
- 3,132
- 113
- Location
- Fort Worth, Texas
Washed, ground, and painted the base coat on this M35A2. Brown and black to come. I feel if I could get the green a little darker a black Army start would be enough. I may do one like that later.
Attachments
- 2,053
- 2,949
- 113
- Location
- Florence, SC
Ok, so I pretty much got everything under the hood I wanted cleaned, repainted & replaced done. Still got one or two small things to do, but they are cosmetic and I still want to change the belts. Here is what I have got...
Attachments
FloridaAKM
Well-known member
- 2,699
- 392
- 83
- Location
- Gainesville, Florida
This afternoon, I need to finish checking fluids & loading the Deuce to go to our winter MVPA meet in Mt Dora. The meet starts tomorrow & runs thru Sunday. Another fun filled weekend. Pictures next week.
w250guy
Member
- 33
- 21
- 8
- Location
- Stamford/vt
Did some hay hauling with the ol’ girl over the weekend, Friday temp was 13 she fired right up ran great, Saturday temp was 1 and the batteries wanted no part of it. Had to jump it and she fired right up with some good juice going to her.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- 6,555
- 13,939
- 113
- Location
- Hawthorne, NV.
Look forward to the pictures. Have fun and have a safe trip.
- 23
- 100
- 28
- Location
- Oregon
The heater duct hose was quite rotten. I replaced it with some flexible vacuum hose I purchased from McMaster-Carr. People are always asking what my truck is, so I also installed a sign on my toolbox to properly identify it.
Attachments
- 3,256
- 3,354
- 113
- Location
- NORTH (Canada)
I like the plaque!
- 6,555
- 13,939
- 113
- Location
- Hawthorne, NV.
Changing out the right front brake flex line. It doesn't look to bad but I'd rather play it safe.
- 806
- 831
- 93
- Location
- W.WA
Maybe put an addendum identifying the driver like they do on race cars.