- 196
- 357
- 63
- Location
- Leechburg, PA
I’ve seen some hack jobs but they way they integrated the CTIS wow cut a notch out of knuckle and silicone shut wow.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What did you do to your deuce this week?
- Thread starter Seth_O
- Start date
- 196
- 357
- 63
- Location
- Leechburg, PA
OK guys I need some help here I have looked through multiple TMS but can't seem to find the torque specs for the upper and lower kingpin plates the bolts and nuts I believe I found the upper 80-105 but I have looked through TMS on here and the ones I own can't find the lower are they the same as the upper. There going to be if I can't find them thank you.
- 7,716
- 19,766
- 113
- Location
- Charlotte NC
.
I was rummaging for torque specs recently.
I found a 1990 version of THREADED FASTENERS - TIGHTENING to PROPER TENSION
Military Handbook MIL-HBK-60 (I uploaded it here)
Saw nothing about a kingpin plate in that document though. Seems based on the reading, if the upper bolts and lower bolts are the same diameter and thread pitch and grade - they should be torqued the same. I think?
- 196
- 357
- 63
- Location
- Leechburg, PA
Thank you that’s what I’ll do they take same size socket. Putting DS knuckle back together after installing new boot and grease. The zipper boots had holes in them got some nasty grease out. I’ll button it up tomorrow after work and move to the passenger side front then the rears
Attachments
williamh
Well-known member
- 472
- 642
- 93
- Location
- SanDiego Ca.
Flag pole duty
Attachments
williamh
Well-known member
- 472
- 642
- 93
- Location
- SanDiego Ca.
My rule of thumb was to pump it in till I see a little starting to seep out
Aussie Bloke
Well-known member
- 725
- 373
- 63
- Location
- Lost, out bush in OZ
G'day everyone,....
In two days I'll be getting my Deuce out of storage, the next day I plan to take it on a LONG trip to go meet a M109 owner who is working on his to get it ready for its roadworthy so he can get it on the road.
I can't believe there is a M109 down here yet alone within driving distance.
My Deuce may have found a 'playmate'.
Aussie.
In two days I'll be getting my Deuce out of storage, the next day I plan to take it on a LONG trip to go meet a M109 owner who is working on his to get it ready for its roadworthy so he can get it on the road.
I can't believe there is a M109 down here yet alone within driving distance.
My Deuce may have found a 'playmate'.
Aussie.
- 3,256
- 3,353
- 113
- Location
- NORTH (Canada)
Went on a backroads drive for a couple of hours. I live in a beautiful area when the weather is nice!
I arrived at the end of a road and the only way to turn around was to use a guy's driveway. I decided to be polite and ask permission, rather than just backing into his driveway (the guy was working in his yard).
We talked and he said "well, you can turn around, OR....I built this road right behind the house that loops back to the river and then there is a gate to the main road." It is a huge forest and bush area back there and I had no idea there even was a road. I also had no idea that a property that looked like an average 0.5 acre residential lot was actually around 150 acres!
He normally uses the road with a pickup truck and a few spots were tight between the trees, but no real issue for the Queen to sneak through.
One branch of his road goes to a beautiful overlook over the river and I checked that out. While I was there, the owner shows up with his pickup and the wife. His wife had given him grief for sending the "poor man and his big truck" up that gnarly road and she made him go to make sure I did not get stuck and needed help!
Man, if this guy ever decided to sell off a parcel, that would be a home on a flood-proof overlook with killer views of two rivers merging.
Driving a Deuce leads to the most wonderful discoveries!
Truck runs like a champ and I also installed the 2-hole injectors from the spare LDT engine. The freight train smoke is all but gone, "fuel economy" (lol) seems better and I do not notice a (huge) difference in power. The seat of the pants dynometer says that power and response were a tad better with the single hole injectors but I like the fact that the LDS does not lay a smoke screen wherever it goes.
Last edited:
- 196
- 357
- 63
- Location
- Leechburg, PA
My Deuce didn’t make it out for the fourth still working on seals passenger front grease looked like someone had horrible diarrhea and couldn’t find a place to go except in the knuckle and I have a stripped out nut on the split rim I’m dealing with always something lol. Love seeing pics of the trucks out in about
- 3,256
- 3,353
- 113
- Location
- NORTH (Canada)
I cannot un-see that image in my head.
- 196
- 357
- 63
- Location
- Leechburg, PA
Upgraded the deuce today with a lmtv step so the 5’2 wife can get in. Now no excuses about not wanting to take it because it’s to hard to get in lol
Attachments
- 7,716
- 19,766
- 113
- Location
- Charlotte NC
.
Good Deal!
Now your co-pilot can tell you which way to turn.
In all honesty, hopefully now you can get her involved in the Big Green Truck disease with you!
- 6,555
- 13,939
- 113
- Location
- Hawthorne, NV.
My CO goes with me on most of our Green Adventures, weather it's the Jeep or the M35. it's more fun when she's along.
Last edited:
Cant ever have enough junk rags for that job.
Makes me cringe even thinking about that repair again.
Aussie Bloke
Well-known member
- 725
- 373
- 63
- Location
- Lost, out bush in OZ
G'day everyone,...
In about 12 hrs from now,....
ROAD TRIP!!!!
Aussie.
In about 12 hrs from now,....
ROAD TRIP!!!!
Aussie.
- 3,256
- 3,353
- 113
- Location
- NORTH (Canada)
@Aussie Bloke I am sure your truck will like its buddy! Hope it all goes well!
- 6,426
- 4,985
- 113
- Location
- Ft. Lauderdale, Florida
Think of the name "dust boots".
Does not say grease boots.
There is a fitting that one is supposed to remove when greasing the front end.
It is a "tell tale"
Do you want pictures?
Does not say grease boots.
There is a fitting that one is supposed to remove when greasing the front end.
It is a "tell tale"
Do you want pictures?
- 196
- 357
- 63
- Location
- Leechburg, PA
I’m good thanks though I got the front ends done new boots new grease put back together working on the rears now
Aussie Bloke
Well-known member
- 725
- 373
- 63
- Location
- Lost, out bush in OZ
G'day everyone,....
Well yesterday I went on a road trip in the Deuce.
Went to meet up with a guy who bought I though had bought a M109 but it was in fact a M185A3.
Anyway I took him a complete PDF copy of the workshop manuals and we had a great chin-wag about the trucks.
This guy is ex army and was also their driving instructor, he has always wanted a Deuce since he first saw them when 'the
yanks' bought them over here for joint exercises to train with the aussie army, it turns out they left a lot of them behind and
thats why there are a few down here, (This was news to me.) some were scrapped and some found there way into private collections. he got his from
a deceased estate, came with tools and a soft top for it.
Also he has a International MkIII in his workshop, I forgot to get any pictures of it with all the talking,..
Anyway as I was early for our arranged time to meet and I had been driving for 1.5 hrs I stopped in the town just before
where we were to meet to stretch and have some of my traveler coffee I made for the trip.
And here they are together:
To be continued,......
Aussie,
Well yesterday I went on a road trip in the Deuce.
Went to meet up with a guy who bought I though had bought a M109 but it was in fact a M185A3.
Anyway I took him a complete PDF copy of the workshop manuals and we had a great chin-wag about the trucks.
This guy is ex army and was also their driving instructor, he has always wanted a Deuce since he first saw them when 'the
yanks' bought them over here for joint exercises to train with the aussie army, it turns out they left a lot of them behind and
thats why there are a few down here, (This was news to me.) some were scrapped and some found there way into private collections. he got his from
a deceased estate, came with tools and a soft top for it.
Also he has a International MkIII in his workshop, I forgot to get any pictures of it with all the talking,..
Anyway as I was early for our arranged time to meet and I had been driving for 1.5 hrs I stopped in the town just before
where we were to meet to stretch and have some of my traveler coffee I made for the trip.
And here they are together:
To be continued,......
Aussie,
Aussie Bloke
Well-known member
- 725
- 373
- 63
- Location
- Lost, out bush in OZ
G'day everyone,....
So where were we,....
Oh yeah,...
We might get to meet again and have suggested a trip or two when he has his fixed up and roadworthy and on club reg like mine.
After I got back home I parked my deuce out in the front yard, the next morning I had to move my inter from right behind the
gates so I can get the Deuce into the back yard, now keep in mind my Deuce ran flawlessly all yesterday.
This morning I start the Deuce, she fired off instantly, but after a while the low air pressure warning buzzer is still going off,...
The air gauge is not going up,...
Whiskey Tango Foxtrot!??
I can't hear air leaking,... I press the brakes and they work and the air pressure dropped a little as it should but dose'nt rise,..
So I open the side panel to the engine and it all looks ok,... but then I notice the compressor pulley is'nt moving,...
Neither is the belt, looking closer the belt is shredded and hanging loose.
Now how the heck did that happen? When I parked up last night I had full air pressure and while I sat there letting the
engine idle to cool down and let the turbo spool down the air pressure regulator popped off a few times so it was working.
The good news is I have a new belt in the care package I got from Big Mikes with the new filters, belts, radiator hose's.
The bad news is I don't as yet have the special wrench for the compressor pulley.
I want to get one later but I guess I will need to get one sooner than I had planned.
Until then I can do it the 'hard way' with standard tools, its a bit of a bitch to do without this wrench so I'm told,,,, but it can be done if you
know the right expletives and have the correct creams on hand for the skinned knuckles etc,...
PS: his M185A3 is an 88 build so was one of the last,....
Aussie.
So where were we,....
Oh yeah,...
We might get to meet again and have suggested a trip or two when he has his fixed up and roadworthy and on club reg like mine.
After I got back home I parked my deuce out in the front yard, the next morning I had to move my inter from right behind the
gates so I can get the Deuce into the back yard, now keep in mind my Deuce ran flawlessly all yesterday.
This morning I start the Deuce, she fired off instantly, but after a while the low air pressure warning buzzer is still going off,...
The air gauge is not going up,...
Whiskey Tango Foxtrot!??
I can't hear air leaking,... I press the brakes and they work and the air pressure dropped a little as it should but dose'nt rise,..
So I open the side panel to the engine and it all looks ok,... but then I notice the compressor pulley is'nt moving,...
Neither is the belt, looking closer the belt is shredded and hanging loose.
Now how the heck did that happen? When I parked up last night I had full air pressure and while I sat there letting the
engine idle to cool down and let the turbo spool down the air pressure regulator popped off a few times so it was working.
The good news is I have a new belt in the care package I got from Big Mikes with the new filters, belts, radiator hose's.
The bad news is I don't as yet have the special wrench for the compressor pulley.
I want to get one later but I guess I will need to get one sooner than I had planned.
Until then I can do it the 'hard way' with standard tools, its a bit of a bitch to do without this wrench so I'm told,,,, but it can be done if you
know the right expletives and have the correct creams on hand for the skinned knuckles etc,...
PS: his M185A3 is an 88 build so was one of the last,....
Aussie.