Hi Tim! Not to mention topping it off! That cap is hard to get a wrench on due to all the stuff in the way. I usually use a short wrench and I never seem to have a funnel long enough to reach it! A definite upgrade. Hope you are doing well.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What did you do to your deuce this week?
- Thread starter Seth_O
- Start date
Great idea! My master is the stock one above the light switch.
- 849
- 1,740
- 93
- Location
- N. Central Idaho
Wrong terminology, sorry.
The switch in the pic is a disconnect between the battery (-) and ground. Turn it on then the master on the dash.
The switch in the pic is a disconnect between the battery (-) and ground. Turn it on then the master on the dash.
Aussie Bloke
Well-known member
- 729
- 404
- 63
- Location
- Lost, out bush in OZ
G'day everyone,.....
Yesterday I found a mattock and a shovel for my Deuce's pioneer tool rack.
They should arrive in a week.
I have an axe thats well used so will look good, still has a bit of life left in it.
Then I can fit them with the new straps I have for the tool rack.
Aussie.
Yesterday I found a mattock and a shovel for my Deuce's pioneer tool rack.
They should arrive in a week.
I have an axe thats well used so will look good, still has a bit of life left in it.
Then I can fit them with the new straps I have for the tool rack.
Aussie.
- 97
- 236
- 33
- Location
- Pantego, NC
I added some yellow decals to the doors and tailgate for the “correct” ish Air Force markings. Also some additional stickers in white that I had made just for Ole Blue.
- 7,769
- 19,877
- 113
- Location
- Charlotte NC
.
I like your blue deuce. Nice looking.
There are three decals that I absolutely love!
Can't quite figure which of the three are best...
1. Go AROUND If it was meant to go FAST it wouldn't be shaped like a Brick
2. Black Rifles Matter
3. NO AIRBAGS We Die Like Men
Money well spent DutchmanZ !
Aussie Bloke
Well-known member
- 729
- 404
- 63
- Location
- Lost, out bush in OZ
G'day everyone,.....
Love the 'Black Rifles Matter'
Just arrived 20 mins ago, my 2 sets of compressor wrenches!
And of course its going to rain today!
sigh,....
Aussie.
Really love the last two!
Love the 'Black Rifles Matter'
Just arrived 20 mins ago, my 2 sets of compressor wrenches!
And of course its going to rain today!
sigh,....
Aussie.
- 97
- 236
- 33
- Location
- Pantego, NC
Thank you sir! I’m rather fond of the old girl and thought those 3 were perfect for anyone stuck behind me. I really wanted a multi fuel but the gasser has a beautiful sound that’s all her own. I’m trying to convince my wife we need a bobbed A2 to park beside it.
- 7,769
- 19,877
- 113
- Location
- Charlotte NC
.
Heck Yes!
You could fix her up with a bobbed version, complete with air conditioning.
That would give you guys a need to go out for weekend cruises.
- 97
- 236
- 33
- Location
- Pantego, NC
I’ll try that but I doubt it will work. Honestly, we do go to some of the local cruise ins on occasion but we’re always in my 72 K5 Blazer with the top down. Maybe next time we can take the deuce and see how that goes.
- 7,769
- 19,877
- 113
- Location
- Charlotte NC
.
Toss in a couple of pillows just in case and make it a short run.
Who knows, if the weather isn't too hot your co-pilot might enjoy a ride with you and 'ole blue.
- 4,317
- 3,208
- 113
- Location
- Fort Worth, Texas
Did some wheel/tire swapping today among the A3's. The donor is on 6x 20 ton earth mover stands so it's not going anywhere lol. I'll slowly pick her for parts as I need them for the other two trucks. I know they're not the typical A2 banter but hey.. a deuce is a deuce.
Attachments
- 97
- 236
- 33
- Location
- Pantego, NC
A3 is still a cool truck in my book. That looks too much like work though. I hope you weren’t in 95deg temps like we were today.
Beautiful Deuce! Good luck convincing the wife! Bobbers are really good for driving around town and stuff.
Hi Dutch. I would love to see a picture of the gasser engine with the hood up. It would be neat to have a sound clip too, so I could understand what you mean about the cool sound.
- 125
- 214
- 43
- Location
- Florida
This weekend I replaced the 3 spin on fuel filters on my Deuce, the whole process was not too bad and luckily my in-tank pump is working so priming was a breeze.
m715mike
Well-known member
- 2,798
- 3,831
- 113
- Location
- Montgomery, Texas
Do you have a picture of the primary filter? I’m curious what was done to make it a spin-on filter.
- 125
- 214
- 43
- Location
- Florida
I dont have a picture, but I have the primary kit a lot of other members use in this link:
Spin On Filter Kits
It's an adapter that screws into where the standard mounting bolt would hold on the filter can, and the spin on mounts onto that.
Big Tom
Active member
- 212
- 114
- 43
- Location
- Millington md
I sell compressor wrenchs at rock bottom price message me
Thanks Big Tom
Aussie Bloke
Well-known member
- 729
- 404
- 63
- Location
- Lost, out bush in OZ
G'day everyone,.....
Today I had a brain storm,....
Remember a while ago I went to see the guy near me who has the M185?
He also restores and has had a few International Army trucks, he's currently working on one.
It has a winch, these winches can be used at the front OR rear of the truck.
I came across one of these winches for sale and had the idea of fitting it to the rear of my Deuce.
The winch is made by Garwood and is rated at 20,000 lb.
Since my Deuce has the rear PTO still on it,....
See where this is going,.....
Thoughts?
Aussie.
Today I had a brain storm,....
Remember a while ago I went to see the guy near me who has the M185?
He also restores and has had a few International Army trucks, he's currently working on one.
It has a winch, these winches can be used at the front OR rear of the truck.
I came across one of these winches for sale and had the idea of fitting it to the rear of my Deuce.
The winch is made by Garwood and is rated at 20,000 lb.
Since my Deuce has the rear PTO still on it,....
See where this is going,.....
Thoughts?
Aussie.