• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

What have you done to your HMMWV today/lately

C

Coug

Well-known member
Steel Soldiers Supporter
3,003
4,420
113
Location
Olympia/WA
Mainsail said:
Pulled the wheel after work, soaped the valve, the bead on both sides, and bubbles appeared in the hole there, whatever that's called. I tried to re-torque the bolts but it didn't change. I popped the small half off and the o-ring looked OK, but replaced it with my spare (ordered five just in case). No bubbles now. I put exactly 35psi in and I'll check it tomorrow to be sure.

View attachment 893687

The tire guy said he had a lot of trouble with two of the wheels, and he put those two on the rear. This is the weights on that wheel - 46 1/4 oz weights. I'll keep my eyes out for one or two more 12-bolt wheels locally. The other back wheel looks to be the same.

View attachment 893688
Click to expand...
I first read that as 46.25 oz of weights not 46 x 1/4oz weight and thought something was seriously wrong.
12 oz out of balance is a lot, but still within realistic amounts.
As I said in my recent post, one of mine was 9 1/2 oz out of balance.
Still, yikes.
 
Mogman

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
7,017
9,695
113
Location
Papalote, TX
12oz is not ideal but not "out of bounds" for a tire that size, tell those guys to man up and get some bigger weights!
IIRC the max for the Centramatics was about 12-15oz so I could be running close to that without any wheel weights.
Does not matter how you get there, if you are running down the highway smoothly (this of course is a relative term) you are good!!
 
Gcelevator

Gcelevator

Well-known member
Steel Soldiers Supporter
503
716
93
Location
Fort Lauderdale, Florida USA
Mainsail said:
Pulled the wheel after work, soaped the valve, the bead on both sides, and bubbles appeared in the hole there, whatever that's called. I tried to re-torque the bolts but it didn't change. I popped the small half off and the o-ring looked OK, but replaced it with my spare (ordered five just in case). No bubbles now. I put exactly 35psi in and I'll check it tomorrow to be sure.

View attachment 893687

The tire guy said he had a lot of trouble with two of the wheels, and he put those two on the rear. This is the weights on that wheel - 46 1/4 oz weights. I'll keep my eyes out for one or two more 12-bolt wheels locally. The other back wheel looks to be the same.

View attachment 893688
Click to expand...
If you were in Florida i could give you 2 ok wheels. Find a way and they are yours.
 
RJTM998

RJTM998

Well-known member
178
373
63
Location
North Carolina
Mainsail said:
Pulled the wheel after work, soaped the valve, the bead on both sides, and bubbles appeared in the hole there, whatever that's called. I tried to re-torque the bolts but it didn't change. I popped the small half off and the o-ring looked OK, but replaced it with my spare (ordered five just in case). No bubbles now. I put exactly 35psi in and I'll check it tomorrow to be sure.

View attachment 893687

The tire guy said he had a lot of trouble with two of the wheels, and he put those two on the rear. This is the weights on that wheel - 46 1/4 oz weights. I'll keep my eyes out for one or two more 12-bolt wheels locally. The other back wheel looks to be the same.

View attachment 893688
Click to expand...
Jeez that shop need to buy some 1oz weights.
 
R

rcamacho

Well-known member
774
858
93
Location
Bainbridge Island Wa
Cooling stack all done
Headlight assembly back on with missing oil cooler brackets.
Hood hinges were a bear . Corrosion around SS pin almost seized. Galvalytic corrosion between hinges and aluminum headlight housing. All fixed up now and with corrosion prevention tape between dissimilar metals.






Sent from my iPhone using Tapatalk
 
M1165A1

M1165A1

Well-known member
423
873
93
Location
The High Country, CO
Replaced a badly corroded washer pump on the M1152A1. I thought it should take 20 minutes, and it would have if I was smarter. But I spent 30 minutes trying to reseat the self locking retaining ring inside the washer tank before I realized I could just chuck the ring and risk a leak since it would not be a big deal.

If I need to replace one of these again I will buy the pre-assembled tank/pump combo.

IMG_2133.jpg
 
m715mike

m715mike

Well-known member
2,798
3,831
113
Location
Montgomery, Texas
rcamacho said:
Interesting beam pattern. I’d like to see what it looks like projected on a wall at proper adjustment height


Sent from my iPhone using Tapatalk
Click to expand...

I had the high beams on for that picture.

Ok…. Call me the slow one in the family…. What do you mean by “proper adjustment height”?
 
You must log in or register to reply here.
111,192members
165,489threads
2,328,818posts
1,674online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks