What have you done to your HMMWV today/lately

[FlameRed]

Did you completely flush all the lines,evap and cond? if not you likely fried the new comp with particular matter left when the original compressor cashed in.

Once again, @Mogman you seem to be correct. I believe I did not flush it enough the first time the compressor crapped out. I tried flushing it out a second time but it was too late.

Yes, I disconnect all the lines and flushed everything in the opposite direction of normal refrigerant flow. I needed two quarts of flush which is a lot I think.

At least I am getting well practiced at flushing it out and replacing the compressor! The compressor and new receiver dryer is about $150 plus another 2 quarts of flush and R134.

And now at least I have the actual AM General AC factory bracket installed instead of the redneck engineered one it came with from the previous owner. Another "while I am in there..." thing.

 

[Mainsail]

Drove over to the DRMO lot and spotted the first M1151 I've seen in there, and the monster thing.

 

[Mullaney]

Drove over to the DRMO lot and spotted the first M1151 I've seen in there, and the monster thing.

View attachment 931854View attachment 931855View attachment 931856View attachment 931857View attachment 931858

.
That Lengo Bear is in pretty amazing shape - at least from the outside.
Doesn't really look like it made more than a few rounds through the hospital...

 

[Awol]

I've got everything I can out of these Coopers. Both rears are slicks now. I was driving in the rain this morning, and she handles like a fat girl on skates. lol

 

[TOBASH]

I've got everything I can out of these Coopers. Both rears are slicks now. I was driving in the rain this morning, and she handles like a fat girl on skates. lol

View attachment 931992

Yikes!

 

[Awol]

Yikes!

To be fair, they were on another truck for 30k miles. The Humvee finished them off in 3500 miles lol

 

[thompsoncustom]

To be fair, they were on another truck for 30k miles. The Humvee finished them off in 3500 miles lol

Time to bust out the tread regroover

 

[mrfarb]

I've got everything I can out of these Coopers. Both rears are slicks now. I was driving in the rain this morning, and she handles like a fat girl on skates. lol

View attachment 931992

I still see a little tread left, maybe a few more weeks.

 

[irondad2009]

Relocate air filter restriction gauge and install tachometer

Does that tachometer have two signal wires or one?

 

[Retiredwarhorses]

Drove over to the DRMO lot and spotted the first M1151 I've seen in there, and the monster thing.

View attachment 931854View attachment 931855View attachment 931856View attachment 931857View attachment 931858

M1151A1 W/MCTAGS and an M1114 w/MCATGS

 

[cahilj]

Drove over to the DRMO lot and spotted the first M1151 I've seen in there, and the monster thing.

View attachment 931854View attachment 931855View attachment 931856View attachment 931857View attachment 931858

Many years ago (~1999?) when Lenco was still in it's infancy, it was housed in a tiny building across town from where it is now. A friend of mine worked there sweeping floors, and he brought me to visit. I ended up working with their warehouse manager to develop a digital catalog of parts. I doubt they're still using it.


If anyone ever says hand stitching rubber to vinyl is fun, feel free to throat punch them for me. I'm about 70% done. I've broken a handful of needles and my hands are full of holes. I average about 12"/hour. It's a total of about 20'. You do the math

 

[Gcelevator]

Many years ago (~1999?) when Lenco was still in it's infancy, it was housed in a tiny building across town from where it is now. A friend of mine worked there sweeping floors, and he brought me to visit. I ended up working with their warehouse manager to develop a digital catalog of parts. I doubt they're still using it.


If anyone ever says hand stitching rubber to vinyl is fun, feel free to throat punch them for me. I'm about 70% done. I've broken a handful of needles and my hands are full of holes. I average about 12"/hour. It's a total of about 20'. You do the math
View attachment 932163
View attachment 932164
View attachment 932162

Uffffff, not fun at all.

 

[Gcelevator]

After some time (over a year) i started working again on the 1151 for the wife.
Removed all the seats and insulation, cleaned it some and started lying kill matt in the interior and under the dash. I want to insulate under the tunnel as well before installing the wngine back in. I want to make it as confortable as possible for her.

 

[TOBASH]

Faster if you tack down the zipper with pins and silicone.

Fish hook proof gloves from Dick’s sporting goods or your favorite angling shoppe are a necessity.

 

[Awol]

Got some new shoes in. I'm trying out these Atturo trail blades. I have no experience with them, so I guess we'll see how it goes.

 

[juanprado]

Faster if you tack down the zipper with pins and silicone.

Fish hook proof gloves from Dick’s sporting goods or your favorite angling shoppe are a necessity.

I found blood make a good lubricant for the waxy thread and the entertainment I create cusiing every time I poke myself...LOL

 

[rcamacho]

LF cowl armor backing plates.

 

[Mainsail]

A couple more from the DRMO lot:

Whatever you do, don't try to open that door!



This is the third type of LED turn signal that I've seen here. There was only one of these,

 

[jbmatt]

Put her in a car show! First one for the kids

 

[Atchuuu]

Finally got her painted. Just need to put the rear seatbelts in, install the windshield, soft top and doors.