banditt1979
Well-known member
- 273
- 738
- 93
- Location
- Cincinnati, OH
Ordered a new 60psi sending unit earlier this week and received it today. Pulled out the old one and lo & behold:
![20220915_164957.jpg 20220915_164957.jpg](https://www.steelsoldiers.com/data/attachments/634/634752-0fc0d7a2b885ed146805311b0b6145b6.jpg)
Sorry for the blurry picture but that is a 120psi sending unit! Had to remove it with a pair of channel locks, destroying it unfortunately. But now my oil pressure looks much better:
![20220915_170638.jpg 20220915_170638.jpg](https://www.steelsoldiers.com/data/attachments/634/634753-e785f4399f17f7bdd9d4ada358f4b1de.jpg)
Hold between 55-60psi at 1500rpm at around 140 degrees. Here it is at idle. I'm feeling a lot better about the condition of the bottom end now.
Also noticed this little guy on the hood.
![20220915_191206.jpg 20220915_191206.jpg](https://www.steelsoldiers.com/data/attachments/634/634754-95d7e6695d6f4b7ee72fb89bc3d47b9d.jpg)
Looks like all I'll need for windshield washing is the pump handle and some hoses. Can't complain!
![20220915_164957.jpg 20220915_164957.jpg](https://www.steelsoldiers.com/data/attachments/634/634752-0fc0d7a2b885ed146805311b0b6145b6.jpg)
Sorry for the blurry picture but that is a 120psi sending unit! Had to remove it with a pair of channel locks, destroying it unfortunately. But now my oil pressure looks much better:
![20220915_170638.jpg 20220915_170638.jpg](https://www.steelsoldiers.com/data/attachments/634/634753-e785f4399f17f7bdd9d4ada358f4b1de.jpg)
Hold between 55-60psi at 1500rpm at around 140 degrees. Here it is at idle. I'm feeling a lot better about the condition of the bottom end now.
Also noticed this little guy on the hood.
![20220915_191206.jpg 20220915_191206.jpg](https://www.steelsoldiers.com/data/attachments/634/634754-95d7e6695d6f4b7ee72fb89bc3d47b9d.jpg)
Looks like all I'll need for windshield washing is the pump handle and some hoses. Can't complain!