Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
My 09 would run great until I would park it for a day, then it would start and run for 5 sec then die. I would have to blead the injection pump. I thought I had a bad ip. Doing a lot of reading and talking with mechanics, I figured out my gas cap was not venting.
I soaked the gas cap in wd40...
I have never used a HMMWV intake, but I do know that the turbo and non turbo intakes on a civ 6.5 will fit. It is my understanding the 6.5 injection pump fits the 6.2 but is capable of pushing more fuel to injecters.
I guess I don't understand. Is the starter slow or not at all? My starter was slow for years when it gets about freezing. I just changed my starter to a gear reduction and wow what a difference. I think half my slow starting problems was my starter was old in the first place.
Correct me if I am wrong. The onlydifferences between the 6.2 and the 6.5 injectors, are the lenght and thepop-off preassure. I thought the lenght was only in the overall size but thebasses were the same. I also thought the pop-off preasure was controlled by thesmall wafers inside. I was going...
If you are wanting to switch to the gear reduction, here is the part numbers.
Part Number 10465015
Napa Part NumberWIL 91014417
Model 28MT
Vehicle System Voltage 24
Mount Type PAD
Pinion Teeth 10
Pinion Pitch 10/12
Solenoid Position 304
Rotation CW
Strap 23502557
Bolts (You will need 2 of...
I run a bikini top also and have been looking at racks but I have not found one were I can take the fiberglass top on and off without having 2 separate roof racks.
Over the lower groups I placed painters tape to keep the resin out. I filled it with foam and shaped it. I laid cloth over the foam with the groups cut out. The second layer I draped over the edges. For the turn signals I cut the green lens to fit and resin over that. I glued the inside...
I wanted to put aftermarket gauges in because:
1. I wanted to add a Pyrometer, Boost, Tach, oil pressure, and coolant temperature gauges
2. I'm constantly fighting those stupid circuit board with the bulbs working than not working.
3. I think the 4 bulbs take up way to much space.
4. The...
I feel the same way as you do. I have been mocking up a new gauge cluster using auto meter gauges. I will keep the 2 bulbs for the gens but move them below my speedometer. I have already ran a second 12v fuse panel were I have mounted my fuel pump on a toggle. I was drawing up the circuit...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!