Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Most will use one of two methods. There is a glad hand hose made for the rear fixture. Or, if you do not have access to one put a female air coupling under the dash under the glove box on the air that is there and you can use your regular air hose at home if you go anywhere. The amount of air...
If you look at the first pict of the bearing in the rag you can see a slot on the inside for the keyway that is in the assembly shaft to keep the bearing from rotating. Got new
u-bolts today, $53.00 for 4 of them made at the truck repair.
I worked on getting the rusted u-bolts out. The task was not an easy one. I used a long shank drill to drill out the rust and debris in the channels and soaked in Blaster more. I had to remove the wheels as to get a long enough throw for a 4’ cheater bar on the nuts. The nuts came off but the...
Those boys will not forget that day....When your about 85 years old sittin on the porch they will be telling the great grandbabies the story about how you loaded Great grandma's Cadillac with tools and went to get a deuce.....
That did not take long for you superduper charge the Sand Sled....ar ar ar more power, more power...Did ya have to fiddle with the trailer light wires? You should be a professional tow-er by now...Sounded like a good trip 'cept for the deuce NOT wanting to follow. Learn something new...
The rear axle u-bolts are showing the effects of northern winters and salt. The condition was in effect since I got the truck as I do not drive it in the winter and it stored inside. The heavy dose of paint hid this until recently when the rust started to come through.
I have been encouraged...
Camping in your own backyard...well I used to that too. Now you have some lodging for wayward Yankees on the way back to Michigan from Florida..Hope young son is a good hitter with that 8 lb sledge. OUCH!! Maxim
I have removed the link and cleaned and re-assembled. I heated it as much as I dared, but could not get it out. I took the truck to a local tractor repair shop down the road. He suggested to heat the very end of the link , not the plug, slightly red and then quench the plug. He had this home...
Any one have a suggestion for removing a stubborn steering arm. The one that goes from the steering box. I have soaked in Blaster, used the largest blade screwdriver with a wrench on it. I have not hit it with air yet or put heat to it. I know there is a spring inside the arm so I hesitate...
RE: tire tools
I watched Gimp remove some by breaking the bead with a handyman jack and the bumper of a deuce. I tried to help but it threw off his rythum. Ahh youth....
Yea buddy it was a cold day. Out by TedG's there was a 25 mph wind at about 14 degrees. We stopped there to pick up more junk and do light repair. Big thanks to TedG for helping as he a professional. We had good lights after the highlow forks sheared them off. Yup that trailer went to the...