Search results

Has anyone seen this thing taken apart?

how about it Crusher.I need some help.

The responses are great effort and help as well. Thank you.

Has anyone ever taken apart their booster pump which is located on the side of the multi-fuel injector pump. The line from the primary filter goes directly into the pump directly through a plunger assembly. I fear before I have owned the truck someone incorrectly put the assembly together. I...

Gimps. mmmmm I like boobies. Thanks for the great help.

Well I have removed the primary and engaged the fuel pump and boy can I tell you she is pumping. I have converted he primary over to the spin on with a flow rate of 12 to 15 gph. Any suggestions ?

Does anyone remember the secondary filter numbers for cross reference?

Possible.But I am not sure what the plate is.

My m54 5 ton has no fuel pressure between the secondary fuel filters. I am tapped into the bleeder port in that location, can hear fuel pump running, but no pressure. Can anyone help?

Does anyone know if there is a TM For my gas heater? It is a M68 model # VBM-250A. Cannot seem to find any info. Your help would be appreciated. Thankyou. The tm # is TM5-2805-208.

Booster pump Thanks doghead I will check it out.

Does anyone know if there is a drawing or TM that will show the booster pump on the side of the injector pump? I need to replace a spring and plunger in that location. Also will need to find the parts to make the fix. Thanks

Thanks Lee. I will give it a shot. There is no chance that I might warp the drum by over tightening? Ha, just kidding.

M series 5 ton wheel nut torqe Does anyone have spec for the wheel nut torque on the M series 5 ton. I am mounting my drivers side front which has LH thread.Thanks.

Yes. Try this link and I hope it helps. http://www.chinahanji.com

I have a M54 5ton series and as I am sure you have heard about this before my battery box (steel)is wasted. Could anyone direct me to a good replacement? Thankyou.

Yes its possible to desulfate these batteries. You will need to obtain a manual battery charger that has low amper choices. Preferably 1.0 , 1.5, or2.0. Put one on at a time and give it a week. If they do not come back from this the lead plates are too clogged with sulfate. Also yes during this...

Good idea. I was told to use kerosene then drive it slowly around for a couple of minutes then drain it. Dont know if thats a good idea.

Does anyone have a good method for flushing out the tranny and transfer case on a M-54 with the sprague gears? I know of some obvious ones but thought I might ask those who have a really good technique. Thanks.

Well here are some pics I took for Massm35a2 of his shop van. This truck was a good runner. Not as good as his other deuce , but it made it all the way home without one problem. this shop van runs like a dogg just like my 5 ton M54A2. maybe someone could allaborate on this one. Will a different...