Search results

Did you or anyone else inspect this truck? Buying your first truck sight unseen is a recipe for disaster especially when you factor in the export process. "Starts with a jump" can mean a lot of things. I'm almost positive you need a title to get it into canada. To get a title, you have to...

Nobody?

How do you adjust the pressure? I'm going to drop the pan and change the fluid and filters one more time. Some crud could have broke loose since the truck only has about 3,500 miles since 1985. While I'm in there, I'll give it a visual inspection and see if anything looks abnormal.

That may be, does it require complete disassembly to replace? It's strange because it just started one day with no warning.

Did yours always do that or did the problem develope as you drove it?

I have bad luck with automatic trannys. One of my trucks, M923, has just developed (in the last 100ish miles) a strange shifting problem. When shifting into 3rd, it will rev up like it's going to neutral then it will shift into 3rd. It doesn't seem to happen when the tranny is cold or if my...

Hi all, I was going to adjust the shift rod on my M923 but ran into a minor issue, I think. The throttle shaft will spin 360 degrees. My other truck has idle and full throttle stops so I knew this was not right. I peeled back the thin plate behing the throttle lever and found the set screw on...

I occasionally have a similar issue on one of my trucks. I think I have a cylinder that doesn't fire under certain conditions. I'm going to adjust all of the injectors and see if that solves it.

Do you have a part number for those arctic fox heaters?

I purchased a zerostart brand block heater that I will be installing soon, I'll post a part number later tonight. It is the type that replaces the inspection plate as mentioned above. My NHC 250 seems to start ok though, it was 19 degrees the other morning and she started after about 30...

DH, your right. Every possible question has already been answered in the TMs or on here. Lets shut down all new posts and just make this an archive. That will be great for advertising revenue and the hobby in general. Hopefully nobody starts a new forum, this place would probably vacate...

Just so nobody gets offended, no quotes were added to that post but I don't think it was necessary to single anyone out.

Are we in school or what? I think we are all here because we have a common interest, do useless or degrading posts help recruit new members or public acceptance? Seems like some people have too much time on their hands....

Do you have a part number for that?

4" abs drain pipe with a coupler on it works great to drive them on.

Brushmaster, what intercooler are you using in front of the radiator? Is that a stock m939 radiator? What other application, if any, is that intercooler used on?

So what your saying is the small cam 335 block is different from the small cam 250 block? I understand that the big cam and small cam blocks were very different, I would have thought all SC blocks would be cast the same though.

I have a cummins 335 small cam engine that I'm going to pull the turbo, intake and exhaust from and install it on my NHC250. Can the piston oil squirters be removed from the 335 and add them to the NHC250? I'm not looking to make a hot rod, just a little more power and clean up the smoke. I...

Both are great truck, do you want a larger cab and auto tranny or 5 speed and small cab? The wider cab is what won me over.

I've never been to RRAD but I've owned 9 trucks that had a "depot level" overhaul there. Almost all had the same issues. Air lines hooked up wrong, air leaks all over, oil leaks, CARC over spray or too much on inportant items such at lug nuts and lots of other minor issues. Almost all of...