• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. stampy

    Cabarrus County, NC vs the Trappster

    Welcome to the revenue officers. NC needs the "tax" money.
  2. stampy

    hmmwv in MY area, amazing find for me, ashamed i cant afford it right now

    I'd rather uparmor my CUCV...and I think it is comfortable... Parts are easy to find and cheap in comparison to a HUMVEE...but hey to each his own!
  3. stampy

    m1008 diesel to gas conversion

    Oh and you will save huge amounts of money over the swap out for a gas engine (if it's just the glow plugs or control card) and I believe the diesel will give you better economy and low end torque.
  4. stampy

    m1008 diesel to gas conversion

    Well the advice the guys are giving you is great! Look up how to test glow plugs in the search area. It is not too hard to replace them. You can put in a push button setup or just use the glow plug controller if yours is good. Diesels will run on lots of different fuels also vs gasoline only...
  5. stampy

    m1008 diesel to gas conversion

    1 question....Why?
  6. stampy

    Daughter recovering M109 Van.... Help?

    And the green addiction spreads...:lol:
  7. stampy

    400hz gen sets able to do 60hz?

    huh? 30 kw is enough to power a couple to 3 homes...
  8. stampy

    CUCV question for ATF/veg oil/motor oil

    I believe all 6.2's came with a square filter...**** to prime when changing.
  9. stampy

    CUCV question for ATF/veg oil/motor oil

    Remember also I am heating (to remove water) and centrifuging (to remove heavies and particulate) sometimes blending with diesel then using the fuel. It is not as simple as pulling up to your local veg oil tank and pumping into your fuel tank.
  10. stampy

    CUCV question for ATF/veg oil/motor oil

    heres the info I got mine in the boating section at walmart....The filter says not for diesel but I used it until it plugged up then cross referenced it at napa. I don't remember the number off hand. The kit was around 30$ and you have to buy a couple of fittings at the hardware store but it...
  11. stampy

    what to look for in a government liquidation auction vehicle

    Read Read Read...Learn all you can here and get to know your local deuce owners and learn what you can from them. Watch auctions before bidding and see how they work and if possible pre inspect trucks you plan to bid on. Set your personal maximum and try not to exceed it when bidding as things...
  12. stampy

    Deuce missing instrument panel

    Occasionally you find them in Goldsboro or Butner and that's closer for you! I like the ones from Richmond...Always seem to have luck with them.
  13. stampy

    Deuce missing instrument panel

    for under 500 I'd say have them bring it to ya. It's SO much easier to work on it in the driveway than on the highway or in the GL lot (some of the GL guys get kind of testy if you are wrenching on it in the lot (Lejeune)
  14. stampy

    Safely working around Hornets (video)

    ROTFLMAO! Awesome!:jumpin:
  15. stampy

    Project Off-Grid M109A3 w/w log

    Nice paint work!!!! :drool:
  16. stampy

    Kennesaw Mtn GA MVPA Show and Swap Meet

    Isn't that the museum where "The General" is located? It's a real neat museum!
  17. stampy

    CUCV question for ATF/veg oil/motor oil

    ATF, WVO, Diesel...all have been through mine with no problems. I just put on a spin on filter to make the filter changes easier.
  18. stampy

    JBLM M109A3 w/w recovery-SUCCESS!

    Welcome to the 109 club!!!!!!![thumbzup]
  19. stampy

    Wolverine Tech. Centrifuge review

    It was down for a few days. I let him know.
  20. stampy

    Re-introduction of Angry Iron

    Hey those chariots were MUCH more maneuverable than the cassions...rofl
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks