Search results

George, I think everyone is being courteous by not saying this: You bought someone else's experiment. He sold it at a cheap price, probably for a reason. Elimination of a reduction of 2 (half, etc) means your top speed (given infinite hp) would be twice normal, say 110 mph. Think we can all...

Steve, please tell us more about your 'clearance way' of setting the shim thickness. I agree there is something vague, or downright wrong, about assuming the spider pack is 2.1705" thick. They call that thickness "the mean of the hub variance measurement". All the measurements are moot if...

Case Equipment made a suspension lockout to use on the MB-4/94. Basically it was a link with bearing to the outerhub, tied to the Case deck. During development of the SEE, there was a suspension lockout accomplished by using hydraulic cylinders as lockable links. That idea could be easily...

There's a thread here on SS that might help: http://www.steelsoldiers.com/showthread.php?29322-Radio-Test-Set-TS-3957-PRM-34 Read post number 7 which describes the initial test with power off. What are you using to power the PRM-34? Battery (4 AA's)? Is it good? A bad battery could easily...

This is an outstanding thread for CTIS enthusiasts. I can add some part numbers: Examining 6 different FMTV CTIS ECU's indicates part number 19207-12378682. One example had -002 appended but I failed to note the date on that one. Two ECU's from M939 5 tons (that I got from BFR Metals) were...

The handsets might be the most useful pieces, IMHO. Those look like H-250/U (five pin plug) or H-350/U (6 pin plug) handsets and are compatible with any of the older comm gear using the 228/U connectors (matching the U-229/U plugs on the handsets). That would include the PRC-25, PRC-77...

Search on Vityaz DT-30. There are lots of awesome videos of the extraordinary capabilities of these machines, often in fearsome places.

Good comment. No argument from me. I just know my LMTV sounds so much better at lower rpm, and mileage is better, around 8 mpg. Ok, 'I' feel better at lower rpm :-) Maybe cab noise plays a part? Plus or minus a couple of MPG does not make much difference in the single digits.

Hi Michael, I have used Unimog chassis' for campers for many years and still own a U-1300L with a camper on it. Guess what, it is being replaced by an LMTV with a camper. Main reasons are that the LMTV is the most drivable 'big truck' I have had the pleasure to use, and parts procurement has...

There were two major clues: the truck does not like to start when it is cold, and the CTIS lighs blink in unison to starter drop out. Starter loads battery, battery voltage drops, starter drops, batt V bounces back up, starter relay energizes again, etc, etc. My guess, battery voltage is...

I wanted to restore my LMTV to near original so bought a windshield vent for it. Logic said that the windshield will clear better with it in place. Guess what, it won't fit. Apparently the vent has to be removed when the gun mount support post is put in. See the picture. I would rather have...

I use Tractor Supply brand Traveler universal 'tractor fluid' because that is in stock here on the farm. Five gallons is about the cost of your 1 gallon :-) The price has really dropped recently!!!

What is in a complete kit? Is a kit for one corner, one axle, or one truck? Thanks

My 2c. Disconnecting the battery with the engine and alternator running is a bad idea. That simple act can fry the regulator, especially a solid state one, burn out bulbs, and anything else sensitive to Jhigh voltage or spikes. The battery is a huge capacitor to stabilize the peakiness. The...

Hi Mainiak, Of course that pulling jig is generic, copy as you please. I did the job the harder way the first time, when the pictures were made. Don't work so much under the truck. Remove the nose of the differential (the pinion bearing housing) and bring it to the bench to use the jig to pop...

Pointman, thanks for ceiling idea. I am not looking forward to summer heat. This summer will be my first with the LMTV. I have no plan to add A/C. Maybe I am over-engineering the floor plugs. I would like to duplicate the original plugs that plug both layers, the floor and the subfloor...

My floorboard has that tough bedliner-type material, and rust underneath. It has been repaired in the past, too, with fiberglass, so the rust started a long time ago. Luckily the floor has not rusted badly since repaired and the fiberglass is solid. The only way to stop the rust is to remove...

In case anyone else is doing this, the package of Dynamat was 36 sq ft and I ran out. 36 sq ft covered the floors under the seats (completely from front to back including floorboards) and the top surface of the hump. Still wanting to put some pieces on the back wall of the cab, inside the...

Kenet, I hope my project is as successful! I'm using Dynamat Extreme. The big sheet of plastic on the back wall is now laminated on the backside with 3/8" thick sleeping mat. Is that sound meter an app on a smart phone? Neat! How are you guys covering the ceiling? Build a headliner? What...

I have had no problem registering the original Unimog platform, the model 406, for road use. Brand is Mercedes, of course, and model 406, type: 'other', when the DMV looked it up. If the label on the SEE tractors says Freightliner, you might have to use that (but we all know who made them...