Search results

Could someone please help me with the TM or TB for M923a2 paint Instructions? Need the 3 color diagram.

This is all excellent. Will be checking my alignment when I get past some other projects.

If the box has no rust at the seams on the roof, and on the edge of roof where it meets that drip rail....and runs good it may be worth $6k...if it has rust holes which is very possible plan on ripping Interior out. Be very very careful on buying a M109A3.

I bet Groot likes having that much land to roam around on.

I got the tan troop seats painted today and started working on some of the rough areas of the bed. There were 4 coats on the tank. A red, tan, and two different coats of green.

Ya know, in school we had to memorize all the counties but I swear I didnt remember where Chilton co is....had to look it up. Not too far from me in Baldwin County.

Welcome to the site. What area are you in?

Yea they are slow on replies. Keep trying. And yes, their reviews suck. They eventually came through for me. I started a thread on them a while back.

I will be doing that for my next one.

Good looking truck.

I will verify and post. I know it usually idles a little higher than what it is set at due to sticky throttle. Can put my boot under pedal and lift it a little to make it idle down.

He hooked me up with his new clear tube that is easy to install on M939 trucks to see if any air is being sucked into the system via giving visibility on the return side. Works great and I appreciate guys like you making lives easier for the less experienced like me!!

I received the clear fuel line diagnostic tool from 7435A2 today. Installed in a snap and gave 100% good indication that I do not have any air being sucked in....this is way easier than starting troubleshoot blindly for possible air being sucked in.

I did not see this started yet so here it is. I rebuilt the two side rails and headache rack, and installed the new to me troop seats. I also started prepping the underside of my hood trying to preserve it. Got rust popping through in a couple of spots.

Messed IP some....turned aneroid and it helped some. I hope that the Gotcha. I did check and it is nice and tight.

If you dont buy the high dollar fleet antifreeze, make sure you go with a low silicate green antifreeze and use the SCA additive unless your coolant filter you are using gives it the charge it needs. Do not buy test strips. I have one in will mail you for free when it is time for it. I bought...

No photos attached. But....check this out from Memphis Equipment.

Yesterday took it out and ran it pretty good. Then idled down my road trying to build heat. Gauge got to around 230 but shooting the area around the sending unit was around 195....I think. Kinda crowded down there. Looks like my gauge may be off alot. I just want the thermostat to open so I...

I have one. I do like it. Easy and clean. Had it maybe 2 years now.

That is excellent.