Search results

Yes they will title them....either way.

If the clutch is aligned, it is just a matter of as V8srfun said....push and wiggle! I did mine 100% by myself and once aligned, I got under it and pushed up with my knees and feet...all of a sudden it just slammed in place. The flywheel was harder I think.

Where did you find the lights at?

My steering box does not have the nut and flat head adjustment screw on the end of it. Sox with the box in the pucs, how to I adjust some steering play out of it?

I saw that. I forget which website. It is mighty fancy. Not sure my deuces would know what to do with flashy stuff like that on it...

I gotta do that too. I need to move it to the top of the list.

Yea, you cant gripe about that help. Please enjoy every second of it!!!! On the truck, how hot did it get? One of these pro's will offer some advice I am sure.

Thermostat is located on the bottom of the housing you are looking at...a couple more bolts and the tubing has to come off too.

That turned out real nice. Need a pic at night with them wired up and turned on!!!

Plan on cutting a hole for a maxxair vent. Worth every penny...moves alot of air. And I really like that mini wood stove. Just not needed down here....one problem I dont have to deal with is extreme cold.

On your a/c....I had a window unit on the front like some have done...decided that it is in the most vulnerable place for limbs, etc... I know you could build a shield like peashooter but I decided against it and removed it. Sealed it up completely just as I did the center windows on each side...

Do it....

Never knew there was such a thing!!

Yep, We 100% used non SCA added green coolant (in military) I did do a good flush...used cascade...the whole bit. Used napa low silicate green and added SCA with distilled water. But obviously I need to do it again with something that will remove the scale. The system was decently clean when...

Good!!! On mine, water ran down and disintegrated the metal under the wood floor. Ripped all out and replaced with double layer of 3/4" marine plywood. It was alot of work. You are in a much better situation no doubt.

For the fridge, you going A/C or 12vdc or one that is both?

OP, I am in the middle of the same project. Except mine had to be gutted inside. ....all of it. On yours, something you may want to check out is what appears to be some rust where two ceiling panels come together at. This things were rely bad about leaking at the roof seams. I replaced most...

Started process of removing my thermostat and decided I would go ahead and remove radiator side tanks to fix a couple of small leaks. After the many many bolts I have them off and found some scale build up. I am no radiator expert....actually not an expert at anything in the civilian world. Is...

Ya know I just saw a special...forget what it was of a guy who has made different thor's hammers....one would shock, one was filled with tungsten, one had an electromagnet so if energized it could not be picked up.

I got the M109A3 floor mostly completed.