Search results

A friend of mine was saying the same thing. He bought a bunch of stuff including a wrecker ayear ago. It is in Penn. He got a letter stating he now has to d-mil it by cutting it in two with DOD present!

f-glass or wood, 45".

RE: Overson lockout hubs water leak If the inside bearing is OK, I would think it came from the hub side.

Yes, please :wink:

What???

Well, figured it out. For some reason, the wheel cyls weren't in all the way in. Noticed the upper adjusters backed off, but the shoes weren't touching them. Pushed them in, all is fine. Got an OK adjustment, tried doing it as per the TM, but no matter what, always had a shoe rubbing. Just...

RE: trailer Yeah, I knew that about the chains. Do it on my toy hauler, don't know why it's not habit.

last two.

Went out to recover the "unknown" M105 from Barstow. Got there at 7:30, let me right in. Gave them the paperwork, and picked it up! No issues. Had a few surprises in the back. A couple of chocks, a big chain and a tan vinyl cover! Put the lights on, checked tires, lugs, put the 2 front/backs in...

Karl, do you have the innards...plunger and spring? PM me.

Don't know. The numbers on the side of the lining from the new shoe is the same as what's left of the old one.

The seal is seated onto the spindle so it is just below the level of the part it presses onto. I snugged the bearings up with just the inner nut. When I backed the adjusters off, the bottom turned, but just seemed to move the shoe up and down, not in and out. I looked in the TM and don't have a...

Took the left side apart tonite after work, All looked good, bearings, wheel cylinders, springs and all the little hardware. Cleaned, packed the bearings, installed the new shoes, new seal. Backed the adjusters all the way off, top and bottom ones, but the drum was very tight going on. Could...

HEY! Is someoine tryin' to steal it? It's hooked to a truck!! I paid good money for that!

The w-end of Nov.10 is great. I think that was touched on b-4.

The grooves are clean. I was surprised how clean it was inside the boot.

HA! I got the boot. Went out when it was a bit cooler and I wasn't so slipery with sweat, and got the boot on the 2nd try. Had to hold the boot and clamp with my left hand, hold the wrench in my mouth, and tightened it right on up! The hub wasn't loose, I have had the front up a few times and...

I'd say parts too. The cab look in good shape and it still has the trans. Oh yeah, Welcome!

Welcome Justin. There are a few guys up by you. I'm sure if you found something you like, you can coax them into helping on an inspection or other things.

Hey Will. Mike, Jon and a few others were kicking it around. Looks like the Stoddard valley area. Now we just gotta decide where in that area!