Search results

I wonder if the truck rolled on its side at some point and the truck was rolled back with cab unlatched

I have been following this thread for some time now and i can't take it anymore. I have heard about this would have should have bought this other generator deal to many times and don't really care anymore.I will stop reading/responding to this thread as this will never go anywhere. As I am...

I sell the NOS wix filters from military stock and i will say all of them just have the bowl gasket. On the other hand i had a few of the Onan/cummins/Lister petter filters that contained a whole gasket set. Although not a fan usually of Fram i had 5 of those filters and they also contained...

I find going to yahoo or google and searching the terms will bring up the steel soldiers thread. easier in my opinion, as i have no luck with the sites search engine

I too broke a half inch extension and breaker bar. air impact would not touch it, nor would 2 electric/battery operated. I tried 3/4 but my impact socket was too thick and i didnt have an extension. so bought an extension borrowed a socket from work and sprayed in kroil for 24hrs and somehow...

Is the door adjusted correctly so that its not in a bind? my driver door had been replaced and took a lot to get it working well. Standard bolts in metric holes, bent bottom track, and then the handle breaking about the time i got its done. Doors can be a great time.

I second on not having to do the driver side mount more than once. What a pain in the behind

If you have an electric dryer, Range, or water heater. Might be a good time to do laundry or cook a nice meal

What part of Ohio, always looking for more truck owners in this state.

maybe open the drain on the water seperator to make sure you do not have water built up, any diesel fuel treatment is not going to hurt anything, Check for dry cracking in a fuel line letting just little bit of air in the sytem,

not if you cage the brakes just like any air operated brake system

NEW in the box are the 5 gallon/55 gallon 2 inch bung adapters for use with Military Generators and other equipment. Price is $65 Dollars shipped. Lower 48 states only no international shipping. I accept Checks and Paypal friends and Family or cash if in person. More than 50 available Located...

If you are doing talk to type or auto correct please stop i can't follow what you are saying

I got an 802a bought as inoperable recently and pulled the E-Stop out then pushed it back in and it took me a day after voltage testing many things to realize the error of my ways. Amazing how after working on so many units something simple can catch you off guard or just over look one thing.

Diesel Fuel #2 its diesel with Red Dye and no road Tax

What is your throttle set at and how many Hertz are showing on the gauge or your meter. how are you wired onto the lugs and are you in 240v single phase on the phase selector behind the control panel?

Some important information to look at do you have a 3126 or a C7, are your batteries good, good grounds, air leak in the fuel system. not giving us much to go on. This would also be better in the LMTV forum

I see the panel, but i would also need the 12v outlet so we are just under what the plug cost, but I am going to open one up and look at the wiring to see how much needs changed. I have one of the first versions of the generator with regular face on it as well so i can compare.

The Ini Power unit will not work. They are made to pull the cord on a rebranded 1000 watt yamaha Generator with internal decompression valve. To pull start a 831 with a Yanmar requires the decompression valve to manually be pushed to overcome compression

Around the top vents Stainless mesh and Stainless zip ties work for me, pan head screws for the bottom openings with mesh