Search results

I am just curious as to the range of pump pressures that would have been used on that cylinder.

It won't require several hundred dollars in hoses and it won't require welding to install the hf54.

Does it matter? One having a slave cylinder.

Anybody know the relief valve setting/ maximum pump pressure on a 5-ton power steering pump?

Ford and Honda gas engines; possibly others. AFAIK, the Cummins B series is still mechanical flat tappets. Does the CJ-4 oil have less ZDDP than the oils available when the multi was designed? It may not be a big issue with this engine given its robust design. Conversely, I did read...

Several OEMs are now running direct acting mechanical bucket lifters. How are they getting by without massive amounts of ZDDP?

Looks like V8 gas.

Do you, perhaps, also know the alloy and heat treating? :-D

We watered cattle with one.

There was a reinforcement kit (I believe for the M35A3) which added a bracket between the frame and rear crossmember.

Another reason to use poly instead of copper is that bio diesel corrodes copper.

If any of your wives push back because of the cost tell them that a vacuum oven will speed up drying the kids' mittens and boots.

I have one at work because I need to dry desiccant. Look on the used market for deals.

I am pretty sure that I used two shaft seals; one after another. The second seal stick out slightly but still helps.

I've had good luck using a vacuum oven to dry out dessicant (assuming the only contaminant is water).

The guides for the D5000 are cast iron.

There was a production change to an undercut valve guide but it also appears to have been a kit to fit the earlier engines. Unfortunately, I don't have any part numbers. An ag dealer may be able to help you.

Just once. :)

I live two hours from my truck so, instead of actually working on my truck, about all I can do is accumulate parts or do research. I picked up a copy of the 1981 engine technical manual for the White D5000 which is the engine used in the 2-155 farm tractors (among other industrial...