Search results

A very simple install to get a key into the mix... http://www.odiron.com/store/product_info.php?cPath=28_27&products_id=115

Check LMC on the crank assy...

Use the PN's on this page if your going to Napa... http://www.odiron.com/store/index.php?cPath=17_38

Man.. Talk about guys coming out of the wood work!! SWEET!

RE: Quick question! Inside knuckles - snot/grease-packed or Coat the parts with grease, once you have the assy together use the plugs in the housing to fill it to proper ammount. (check the TM) Also note that if you have gear oil in the mix to prolly need to change your axle seal.

I keep seeing these types of things come up... The answer is... No you cannot sell it overseas, regardless of how you acquired it... It is a felony, several actually... to export a MV or any MV part outside of the US, regardless of EUC, whom purchased what, etc... MV's and MV parts are listed as...

Along with falsifying customs documents, the same applies.

Ah sorry FT I might not have them listed online... I will get them up for you tomorrow and shoot you a PM.

If you can manage to get it apart, install a grease fitting in it... this will spare you a crap load of trouble later on.

Most MV parts dealers will not export... All MV parts are considered to be articles of war and are restricted export items. You have to be licensed by the US Dept of Trade and the DOD, plus everything thing you send has a horde of paperwork to go with it. If you get caught sending stuff you...

After seeing Starlight's tires in person I am thinking about yanking off the brand new 31's I just bought and putting on 33's... It makes a huge difference in the trucks appearance!!!

RE: Re: RE: Sway Arm Size and rear Transfr seal? Its really simple... Pull the drive shaft, snatch the old seal out with a seal puller... install new seal... Reinstall the drive shaft.... It takes about 20 mins...

RE: Duece Wheel Stud Dimensions The single wheels I build are 11X20... they are reversible like 5 ton wheels and will fit both flipped and non flipped hubs though most people do flip the hubs to even out the wheel spacing front to back keeping it more or less the same. There are also some that...

RE: Steel Sildiers Rally I dont know about SC but we will be doing that again in Feb 2009... same time... same place... Save your beans for parts and fuel... get your vacation in order and come join us in the fun!!!

Paul, If I am reading this correctly that includes any vehicle made prior to 1966... Im also interested in this part... "except as otherwise authorized by the statutes." Part of your discovery on this case needs to be done at the DMV it's self. If you are handling this case yourself you...

RE: NJ to FL, partially empty trailer You guys looking for wheels from me might want to jump on this!!!!!

http://www.steelsoldiers.com/index.php?module=pagesetter&tid=10

Skip that and pick up a gear reduction starter, they usually out last the trucks they are put in!!!

RE: water Ya really dont stand a chance with out a diesel... and like Wayne said... over the axles are going to ruin most everything. After pulling the fan your non diesel problem will be self correcting... then you can go shopping for a 6.2 or 6.5 lol

It’s possible to have a seizure and then spin freely again after cooling down, ether a bearing is going out or part of the winding is coming apart inside. You will not find these at Napa / AutoZone / etc as you need an isolated ground for the 24V; however you can get one built locally at a...