Search results

Do what you want but dont pull it in reverse low. (beleive it or not Ive seen many many people try to pull stuff out by using reverse, always a bad idea)

I believe that's what he was asking. If you put the jumper cables on the same terminals the slave cables hook to you should be good. (As long as the last guy to put batteries in wired them in correctly). Use the heaviest jumper cables you can find. I've seen some pretty small gauge jumpers...

It means Im a friendly, damit, dont shoot me.

Glen (91W350) down in Salina at BFR metals used to have a whole stack of 5ton ISO beds. But that was over a year ago I bet they've been scrapped out by now but you might give him a call.

I can't help you with the trailer. However, your grandfather, shake his hand for me and say thank you. He raised his right hand and said "I'll do it" , and that in itself deserves a certain amount of respect regardless if he saw combat or not.

Probably the JAG paddy wagon. Lol

My guess would be the attachments don't work because that's posting copyright material.

Not without a lot of modification. (Like sectioning a considerable amount down the middle)

I would sue the previous owner for your loss of wages and the money you lost out on savings today.

The OP is not running ac to another location, he wants to use it in the back of the truck. As far as those laws are concerned "idle" does not mean rpm idle speed but idle as in sitting still with the motor running.

tighten the cable just enough to keep it from jumping off the pully yet not cause the brakes to drag. Also dont slap the handle up (off) with alot of force, raise them in a controled manner.

What does the sidewall say? *edit*. We're in the deuce forum so one would assume your putting them on a deuce

Common mistake. If I didn't know any better that's the forum I would go to to look for help from the website members.

Question? Once one buys the bus it is no longer owned/operated by the school so technically wouldnt the new owner be required to pay the tax on the fuel in the tank? I know its a far stretch on the off chance that you would get stopped on the trip home from buying the bus but what about...

Is the eaton unit the only type of locker that could be found in these trucks?

Posted by phil2968. ( sorry forgot to hit reply with quote) "It will work with just one side of one axle off the ground. Brakes are a different story, don't know anything about a five ton. Have done this test on a 2.5 Rockwell and it will unlock because you turn the axle faster than the...

If you just pull the pin and let the leg swing free it will go past the locking hole and allow the pin to drop in behind where it is supposed to. ( that would let the leg look like it does in pic #4 in 3dAngus post)

If you have a "people personality" start asking around at any of the local volunteer fire deptartments that use surplus MV's. Most of them that had an M715 at some point probably removed the tailgate and tossed it in the corner of the barn. That's how I got the tailgate for the M715 that I used...

Heres a link to the OP's truck pic

I know what your saying. What I should say is I'm a firm believer in stand your ground. If you lost and got pushed out then you didn't have a very good defense.