Search results

Did you pull the glowplugs out so you can turn the engine easy?

You are keeping a glow plug relay in the system since the glowplugs pull about 100 amps total.

Leave it hooked to the card, just splice into it with another wire

They are identical, the left side puts out about 14 volts and charges the front battery and it also sends 14 volts to the isolated ground lug on the right alternator which then adds another 14 volts and it outputs about 28 volts to the rear battery - I may be wrong but I think that 28 volts...

OK Thanks

What would be a good source for a working condition Overdrive 5 ton trans and price range?

OK What did you guys do with Mr Ezfeed? I cant get ahold of him to go get that trans :-P

Whats wrong with 5 - Tons??? :-) ?

PM sent to ya ezfeed. Anybody know about how much the 5 ton trans weigh?

Yeah let me know on the numbers? I got dibs? :-D Dave

Does it have a Spicer # on it? 6352 or 6453?

Im interested and within driving range.

You can get brass fittings at Home depot or Lowes, I think that would be much better than iron.

How bout a pc of 1/4 inch copper tubing? Flattened out at the end?

What kind of rims are those? Size? Steel or painted aluminum? Do they have a load rating stamped on them? My big issue with rims is Load rating, a lot of cheap aftermarket wheels have a 2000 lb rating which sucks! I want at least a 3400 lb each rating. These trucks are heavy and im...

Maybe check around and see if any tool rental places will rent a big gas or diesel powered compressor for a reasonable rate for a day or two. See if they have one with 50 cfm output. That combined with a harbor frt or Northern tools pressure pot style blaster and you can kick butt. A regular...

Hows your truck doin ken?

I read on pirate4x4 that the 37 in radials wont mount on unmodified 8 bolt H1 wheels. The run flat is too wide. And the bead is thicker on the radial and the wheel bolts wont tighten up before the run flat is contacted. The 8 bolt work with the 36 in bias tires and 12 bolt H1 work with the...

Hello , Sent ya a PM with details of a load ( Large machine tool, 13.5 ft long, 30K lb) from Pittsburg PA area to Houston, TX. Thanks, Dave

Got it back and it works good. When I ran it the other alt- drivers side was squeeling like hell and it was that metal guard for the radiator hose was bent down too far and the top of the left belt was hitting it. Bent it back up and im good to go. Making progress, Elec system seems pretty...