Search results

Not to be an arse to the above answers but here is the deal with aluminum... (years of aluminum experience) Two choices... Strip... it or part and piece... The second will always cause issues with corrosion along the wear lines... Bare aluminum should be treated with a conversion coating as...

Man... you guys keep posting these things Im gonna have to buy a 5 ton and go from one project to the next!!!

I think this change is in reaction to the investigation over the past few years which turned up items being sold which should not have been. Missile parts, gun parts and other things which were ether sold in "non EUC" auctions... were sold as "EUC items" but to parties that should not have been...

I would give it a good washdown with a mildicide to kill the funk off and get one of these installed to keep it from comming back... http://www.solarhome.org/index.asp?PageAction=VIEWPROD&ProdID=647

Napa... Echlin carries the switches, pending the part number some have mutable covers and a removal tool with them so you can swap them out. I have seen them sell for as high as 38$ a pop but I would say the average cost at Napa was about 14$ which is not bad for a waterproof switch. Nice part...

ken try www.tapco.com ... they have pretty good picture of their products.

OD fever... and BAD!

For those whom are wondering... yes... im being lazy this week! Got the doors remounted... Fun that was... I had to remove the hinges a few times and crush the thickness down on them to get the doors properly aligned, if there is such a thing on a deuce!!! Window motors are in, the mock up...

Reb, I should have elaborated on my belts, I have also installed AC on my truck so mounting options were nil to none for the 12V. If I were to add just a 12V alternator to my truck I would put it above the 24V where my AC compressor is located this will allow you to simply run longer belts to...

You can add an inverter but can only get so many amps but enough to run a radio plus a few odds and ends. Pulling a 12V wire off of one battery is not a good idea, when you hit the ign switch you have 24V and your throwing your load off between the 2 batteries... You can add a alternator and...

RE: Put 1050 CA 875 CCA in mine but took some mods Optima battery makes a adaptor plate that fits the military 6TL battery tray to their gel cells... The CCA will be higher but the RC will be a little lower pending which battery you buy. If you are worried about forwarding the 6TL and the gel...

Napa numbers are in the cross reference pages, you can use those at any auto parts store for reference numbers...

Ether or... you can plug the exhaust on them or leave them open for vent off (which is needed)...

Yeah but I am still not happy with it... but I am also not going to mess with it right now as I am a little annoyed with the experience. I removed the pump and measured the backspacing and gear engagement depth... as it was the driven gear was only meshing with about 1/3 of its surface to the...

Jon your proably right about that...

Don't be surprised about it requiring motor oil, many hydraulic applications call for a straight weight OE between 10 and 30 weight... I don't have a 5 ton but I do know hydraulic system fairly well... Don't use hydraulic or UTF in a steering gear unless it calls for it... Both foam like crazy...

Yeah pending your line lenght you can install in ether location you just have to criss cross for the frame...

uh hu!!! rofl

I wish I could get one built for me too!!! ... That way I don't have to go through this crap!! Bed... Currently sitting in Kenny's back yard... (im so sorry this is taking so damn long)... I am going to cut the stock deuce bed and then very proably build a slant back hatched cover like the...

I was told I take to many pictures of parts and not enough of the over all truck so here are a few... of that... then I was told to take some closer pictures of other stuff... picky picky picky!!! I got the doors painted today... Dash is taped and drying so pics of that to come yet... and I...