Search results

I just did a search on Ebay, and couldn't find any power cables for the M101 or the M105. Can you post a link here for one of the auctions? I'd be very much interested in seeing it. Thanks.

I found a supplier who says he has the cable specifically for the M101 trailer, but he says the NSN number is 00-830-6663 and it is about 8' long. My Technical manual TM 9-2330-202-14P for the M101A2 lists this cable as being NSN 6150008306672, or P/N 8722865 So I'm a little confused about the...

Thanks for the input guys. Armada, so you say you still have enough slack in the pigtail end in sharp turns? That was the one consideration that was still giving me pause on whether or not to go ahead and buy it. I will be towing it behind my M880, so the recepticle on the bumper is fairly...

Hi guys, got a question about the power cable for the M101A1 This is the piece that has the 8 wires on one end (7 pins and 1 grounding connector) with big rubber encased socket on the other end. Well anyway, I need to get a new power for my M101A1. The current Technical manual for The...

Sorry I took so long to reply, I haven't been on the forum for over a week. Technically I'm only missing one, but it may be nice to have a few extra in case I have to replace any of them if I strip or otherwise damage any of them. How about three or four?

RE: Re: RE: M880 Troop Seats hey that would be real handy to have some extras for. I've got one missing on the front bed rail. Would you be willing to part with a few, and if so, for how much? Thanks. :)

I still need one of the rails that mounts along the front of the bed(driver side front), and the one that mounts on the tail gate.

It sounds as if you are trying to combine the advantage of the swiveling pintle hook (for greater articulation off road) with the ease and convenience of a quick change out receiver type hitch. You could just do like I did: with the pintle hook permanently mounted to your bumper, (came that...

RE: Re: m882 dataplate http://www.mvdataplates.com/m880_series.htm another link you might be interested in: http://www.militarystencils.com/ also, http://www.saturnsurplus.com/decals/decals.htm sorry I couldn't find any specific M880 series data plates. I'm sure they're out there though...

RE: Re: m882 dataplate Some one on this site posted a link to a company online that produces blank reproduction data plates. You could order one and then stamp all your correct dat on the new plate. If you do some looking around on the site and on the web you may be able to find the link...

Can't wait to see the pics. Keep us posted. :)

Did I give you that 4 color MERDC pattern? Looks like you used a darker brown than the rest of us. Official color is field drab. Still looks good though, like a MERDC 4 color pattern, but using the NATO pattern colors.

There were other obvious and also some more subtle differences in the fenders, bed, tail lights, and especially interior between the `70's and `80's Dodges.

M880's came standard with a 318. If this one has a 360, then it has been swapped in and is not original.

Don't even think about trying to use the stock 6.75" wide 16.5" wheels that the M880's came with. They are much too narrow to use on humvee tires especially the older 36" tall bias plys. Even the 8.25" wide 16.5 after market spoke wheels I used are pushing it. I've read that it is recommended...

Are you looking for the NATO 3 color pattern, or the original 4 color MERDC pattern? The NATO 3 color pattern can be copied from the CUCV ambulance (M1010?) I have the M880 4 color MERDC pattern, but not the M886. However, all you have to do, is copy it from the M715 abulance variant (M725)...

The M880's had none of these smog items installed originally.

Hi guys, I'm looking for a few parts to complete my M880 cargo cover setup. I need the cover snap rail that bolts to the tail gate, and left side rail that mounts at the front of the box (there are two, a left and a right). I have all the other parts that I need, in fact I have a spare set of...

Interesting. Thanks for the clarification.

By the way, why can't you use a bias ply tube in a radial tire, but you can do the reverse?