Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I know there are a lot of old threads on this, but I will need help with physical locations of the various parts and that's often left out.
Driving to work this morning I noticed the transmission shifting late from 1st to 2nd (high revs) and while at slow speed I don't get any shift from 2nd to...
What the heck happened here?
Six hands and a leg to hold everything, get it all back together before I noticed that the shoes I bought eight months ago are much narrower than the ones I took off.
I bought them on Rock Auto and these were the ones they selected.
What do I need exactly?
New...
Trailer has been sitting a while (with the parking brakes set) and i pulled it from its parking spot over to the driveway.
While backing it in the driveway the brakes applied so I pulled it around the block and tried again. This time it went up the driveway but I think the brakes were...
Picked this up on the auction last week.
The story goes there was a guy that bought millions worth or milsurp and recently died, the family is selling all the stuff. The guy at the yard told me that was one of six locations in the US, and that there was at least $3Million in that location.
So...
Won item today and want to pay so I don't get charged a late fee, but I don't understand how to check out.
Where do I put my credit card info?
Why is check-out not the simplist freaking thing I do today?
Finally got all the parts together in one place and ready for install.
Bored a big hole in a cover plate I had laying around- made a lot of noise and mess but it's done.
Then disaster.
Trying to screw the three sections together I managed to destroy the center section. The threads are not...
Yikes, the fleet is down to one operable vehicle!
I need to get the power steering pump pulley off; will this set from HF work? https://www.harborfreight.com/pulley-remover-and-installer-set-12-pc-63068.html
This morning I drove the M1009 to work like always, only today I was getting a lot of belt squeal, and eventually the belt was squealing all the time. In the parking lot I tried a few things and it seems to be isolated to the heater blower. When it's on, the voltmeter is just into the low...
There always seem to be a few dual axel steerable trailers on the auctions but I never see any on the road.
They would probably make good utility trailers for hauling stuff- no tongue issues to deal with. Are they not allowed on the roads? Do they not track well at highway speed?
My last one had to be sold because I didn't have any place to put it, but now that we've bought a house I was on the lookout for another. Won one yesterday and will pick up soon.
The last time the trailer pintle bound up and twisted the riser plate I had in my jeep receiver. I think the...
Does anyone know which pub discusses the installation of the antenna brush guard?
I finally found one that was priced like it was made out of aluminum instead of gold, and I've checked all the pubs I downloaded off this site, but don't see any install instructions. I found the antenna...
1986 M1009.
During the last two cold starts I have noticed the following:
Normal start, engine running, everything else normal:
The needle in the voltmeter drops into the yellow and I hear a relay clicking somewhere
OR
I hear a relay clicking somewhere and the voltmeter drops...
Here’s my new to me 1986 M1009. It has 93K on the odometer, but the motor was replaced about 5K miles ago and the tranny may have been because it shifts nice and tight. The engine compartment is super clean, it has no rust anywhere, and fires up without drama.
I need to fix a few small...