Search results

Where are you guys getting the fuel drain back injector line # 14061569? I’m not seeing it on eBay or using this number?

You mean have it tested for copper and metallic flakes?

It is. The light went out as soon as it started the last time.

Update... beer fixes everything. I’m not sure if me using a multimeter scrapper some of the crud off the wire for the oil pressure sensor or if time did it’s thing but: I cracked a beer in disappointment and started staring at the truck. Then I put the lid to the overflow tank on and opened the...

Hopefully I haven’t ran it too long. I’ve ran it for 4 periods of less than 3-4 mins. I do get a beep when testing the oil pressure sensor for continuity.

I know I’m jumping steps. But what do you thinking would be wrong?

Since the truck last ran well and normal, I have done the following: replaced the radiator with Spectre b850 New Radiator hoses Replaced oil dummy light sensor rear driver Replaced glow plug sensor rear passenger Replaced coolant sensor front driver Replaced coolant crossover with HMMWV coolant...

Thanks for the pictures. It was helpful. I’m still waiting on some parts but I can get to working on the bracket today. Did you have any trouble out of the transmission vacuum line that runs over the passenger side rear port for the paradox system? also, does the desert turtle have an...

Thank you sir!

Copy that..... you seem stressed?

I just received the hmmwv crossover today. I thought the threaded port going to the water pump was going to be 1/2”NPT. But it seems bigger. Do you happen to know what it is? Also aren’t the other ports on the top of the crossover 1/2” NPT?

i'm sorry for the beginner level questions. but i don't seem to have a socket that will fit the oil pressure sensor. what size is it?

Thanks Sharecropper, i looked thru the TM's and didn't see it listed in the parts manual. is there a better manual? Edit: I found the correct manual that shows this sensor. Sorry to bother with a dumb question

Thanks! You don't need approval to view the thread, however you need approval to see the pictures in full size. Otherwise, they end up being 1" squares on your screen that you can't enlarge. Interesting build you have there. I am interested in seeing the final outcome. I especially like your...

Thanks that makes sense. I’m waiting for my profile to be approved by the expedition portal so I can see your pics. Thanks!

When you installed the Paradox coolant system, did you have to get rid of the rear drivers GP controller sensor? It looks like the lines insert at that location.

Hahaha! I definitely don't need a truck that I have to name 16 gauge. I was however wanting enough gauges to monitor: coolant, oil, maybe vac pressure (haven't decided yet). I just got carried away with the oil temp and wasn't thinking about pressure. Since the beginning of this thread, I have...

I started trying to pull the crossover pipe and I am trouble getting the bolt closest to the IP bracket on the right side off. Honestly, I can't seem to get a socket and ratchet on it without taking down the bracket and IP. Thoughts? Also, have you noticed a significant difference since adding...

Now that we have the oil pressure sensor issue corrected. How hard is it to swap to the humvee crossover? Does it match up exactly? Does the heater core hose still come off the crossover? Can you remove the existing 6.2 crossover without removing the injection pump?