Search results

Hey K9 Vic, I used to be on the CV board as well... I had the lifted '96 with BFG all terrains & 3.73 posi for running the riverbanks in Mexico. It burnt to the ground so now I have a CUCV 8<)

Ah Ok, HMMWV parts, I look there. Thanks.

OK, the truck has been parked in the garage a coupla months, its not 1000 degrees outside, I'm ready to take a look at it again. So first thing I did was go to NAPA to get the crankcase breather hardware...no luck with the part numbers listed in this thread or others. Same with ORiellys auto...

Worked at the Motor Pool, huh ? Ya mean Engine Pool ?

yep, I ran 100% transformer oil in my M109, it likes it better than #2 diesel.

Oh, OK. Because I'm thinkin I'm awfully upside down on mine 8<)

Is that all a M1009 is worth, $1500 ? Oh my.

The front, rear, and driver side window guards open, see this other thread that has pix : http://www.steelsoldiers.com/cucv/72038-closeups-cucv-window-guards.html

oooooh, OK, I will look into that. Will pull it into the garage and start checking it out, now that its no longer 1000 degrees out . Thanks guys.

How much is overpriced ? Just wondering as I'll be putting mine up for sale soon...I want to be able to pass the giggle test but not give it away either.

Yep, sell the 1009, take that money + 1500 and put down on the Tahoe. No matter what you do to the 1009, you'll still have just an old truck. I got the Avalanche rather than the Tahoe, however. Yes, I've owned a deuce (M109 variant) and it , though very dependable, had its issues as well.

Yes, it needs more stuff. It has new tires, brakes, belts, hoses, filters. But I still have to charge the air conditioner, put an antenna on it (it has the mount but no antenna), wire this code 3 siren back in, fix the door lock on one side, get a rubber doodad for the brake pedal, replace the...

I'll try that leak fix stuff. Maybe it causes the seal to swell up or something. I have to keep the home owners assoc off my case, oil in driveway = bad.

Well, OK, I appreciate all the thoughtful replies. There is lots of wisdom there. I don't want to work on it anymore, I have no time for another hobby. I like the truck, but not so much that I am willing to make the commitment to maintain it and I cannot live with ANY older vehicle , whether it...

Well, I just put $1000 maintenance into the CUCV including a rebuilt IP and it runs great. It starts, stops, everything works.....but now its leaking oil. I'm guessing rear main seal as its leaking out the little hole at the bottom of the bell housing. I really dont want to face pulling the...

Over the years (dang, decades) I've lifted and lowered various vehicles. In every case, no exeptions, the vehicle handled, stopped, steered, rode , and reliability WORSE than before the transformation. I finally learned my lesson : the CUCV stays stock no matter how cool it would look otherwise...

like this I meant

How did you do it ? Construct a special wheel? Wheel adapter? Use a dual wheel someway? Something like this :

So I started out with the newly aquired truck with a new fuel filter. 500 miles later the truck quit running. The filter was full of crud. Replaced it. Next day it quit running again. Filter plugged up again. Dropped the tank, rinsed out, blew out the lines, new filter, rebuilt injector pump...

I'm running stock 31" tires on stock steel 15" rims, max speed 55 mph, most driving is between 40 and 50 mph. I fill just to the bottom of the fill tube so I can do it the same way each time. Tire pressure is 45 psi. I hear you guys talking 70 mph....I dunno...mine seems wound up tight at 60...