Search results

https://www.defensenews.com/land/2021/01/21/army-resumes-testing-for-latest-variant-of-its-family-of-medium-tactical-vehicles/

Does anybody have a lead on the CTIS angle fitting that replaces the kneeling valve? I have the part number and the DANA web site under "where to buy" has oreilly's listed. I called 2 Oreilly's and they have no clue. One did say they see it on the computer but didn't know how to order. The...

Looking thought some of the pictures of that auction site I see some of the trucks have insulation on the pipes. I also see there is a call out in the parts manual. Was there some type of revision to remove the insulation? Would it harm anything to warp the pipes with some exhaust pipe insulation?

Well changing my belts have turned into quite the lesson on what not to do. In my lessons I damaged the charge air hose on the cool side. I was wondering where I can get a replacement. The parts manual shows only a OEM part number an in my attempt to cross the number has ran into a dead end...

Anybody else have this issue? I have been trying to find what is making all the noise without luck. Sounds like it coming form the back. Anyone have any tips?

Do you think its worth the 5 grand to install the gears? I am trying to decide if I want to spend the money... What are the pros and cons. Would you spend the money again?

On a road trip and I spotted this gem here. I think it was a M1088 but I am not 100% sure. Check out the paint/wrap !

There are 4 different relays used in the A0 PDP. You have a 4 and 5 pin and 12 or 24 volt coils. I decided to keep it simple and use the 5 pin relays. The 5 pin will work as a 4 pin with no issue. All you need is a 12 volt and 24 volt coil relay. You only need 2 to keep as spares. I chose...

After my issues with the leaky front transmission and watching the video below... makes me wonder if there are more leaks out there? Have you taken your bell housing drain plug out and checked for oil?

One for like rebuilding the trans. I have looked in the TMs and I am not finding what I am looking for.

I have oil leaking our of the bell housing drain plug. It's oil from the trans I believe. How screwed am I to fix this one? Thought? Sympathy? Should I just junk the truck? There is no way I am equipped to drop a transmission.

There is a grab handle on the A1 trucks. I would like to add something like this to my truck. Is there any leads and if not can someone please post a better picture of the handles below. Also I have A1 sun visors. I believe there is an access hole above where the visor mounts to the cab to...

Well I need some new U-joint bolts... and I am having a heck of a time finding them. Now the military uses a break away type and I have only found some on the e auction place and the seller wants like 14 bucks each.... I aint doing that. I am looking for the Spicer 5-73-109 that is used with...

I upgraded the boarding handles on my truck. So now I need to cut a natch for them on my kick panel. Can someone measure top down the opening. I don't want to hack mine up too much. Thanks

With all of the horror stories I have been reading about registration... Only about 10 mins and away I go... Next is insurance... If you are in the Snohomish county area of Washington I recommend Barbbs in the city of Snohomish. It was Painless...

I am wondering if there is anybody with a setup/software to connect to the main unit (box) here in Washington. I would like to try and see if there is a way to "reset" the 5 solid light issue. I have an idea that a fault code is set in memory and stopping the unit for working. I am also...

Any leads on item 29?

So I got the truck up and running after worked through a starting issue. I can select Drive, Revere , and the truck will move. I can select first (1) when the truck is sitting you can feel the trans shift from 2 to 1. I can also select mode. The problem is when I start out and speeding up to...

I am looking for the 4 plastic plugs that are under the windshield. I am not having the best of luck finding... I must be doing it worng as I would think they would be easy to find. These here... and I don't have the old ones. They didn't play well with the grinder and welder

I went out and spent big bucks on a new windshield gasket. When UPS finally got it here I see it's not the same as the one that was on the windshield. There is no corner molded in to the gasket like the picture below. It looks like the profile is the same just no molded corner. So my question...