Search results

FMTV Tractor protection valve repair kit Here is a photo of the Haldex repair kit RN31BC

That is strange as when you reference the Haldex site and enter the Part number for the Military Part N50012 it cross references the OE Part number N30162RD which is the same as the KN34101. Is the same exhaust valve installed? Where all the connections the correct thread on this model?

My truck has started to leak a lot of air when the brakes are pushed. It was coming from the rear of vehicle, so was hard to diagnose just by myself. I used a rod to hold the brakes while I diagnosed where the leak was coming from. The leak was coming out of the exhaust valve on the Tractor...

Original Photos Here a few before photos of the inside prior to completely removing the cabinets. The front will have a bathroom with shower installed where the AC was previously. The original wiring is amazing in these containers by Wheeled coach. They even offer Lifetime warranty on the...

Interior work Installed the Fiberglass reinforced panel (FRP) of the left side wall this weekend, and added the stove vent, faucet for the sink. Started on installing new switches for the lights, water pump and outside flood lights (which will be aftermarket LEDs). This next weekend will work...

Nick, Things will get better for you Nick, you have a lot to offer the right company, and a great personality. I think it would be great if we can get the SS members together and help get this on the road for you again soon. You are truly a person that after meeting one wants to remain friends...

Mark, I only towed it a few miles. one flat ground it was not a problem with the weight, but hills may be different. Still debating on whether I should just remove the heavy bed of the trailer and just set this right down on the frame. It would be at least 16" lower :) Or the other idea is...

Progress on conversion I have made good progress on the interior the last few weeks. First was to remove all the cabinets from the top walls which I will not be using to lower the center of gravity and also open it up for sleeping, seating, and a kitchen. These areas I have already roughed in...

Ambulance body sitting on trailer. The wheel wells will get a cover and be additional storage area and provide access the the underneath of the shelter (This is the basement model :) ). I do need to change out my sway bar bushings, as one is missing and you can see the trailer sway at the top. I...

I will be picking up the Ambulance box this weekend, it is basically the same size as a S-280 shelter. The height is only 2" higher, and width is right at 8 feet. Some very good youtube videos out there on people converting these boxes to RVs. If you compare the box to what is on the CUCV...

Thanks Mark, just what I needed to know. Maybe one day there will be a complete original install instructions with all the PNs from one of the original kits that had everything.

Looking good Mark. I am sure the Texas heat and humidity with allow it to settle just fine. Can you take a photo of the evaporator that you installed? Eventually I want to start on my AC.

The one I am looking at is 7'. That will put the top of the box at 1' higher than the tarp is now. Total height 12'.

Mark, Typically this size comes off a 94--99 E350 Ford Ambulance. I have found a few I am looking at, some the boxes only, and others with the complete truck. The side compartments are done in diamond plate aluminum, and they usually have very large converters, battery boxes, ect. I will take...

Well I am thinking about building a RV shelter on the M-1082. Some of my criteria for this build is not to modify the M-1082 trailer, but just add a shelter. Also the shelter could always be moved to the M-1078 and sit on the same bed. After doing the M-146 a few years ago, I decided this time...

Right now it is not in my budget to purchase one, but it would be nice to know if it were even work due to size. Just thought you may be able to accomadate this request and not deceiving you that I was interested in buying it at this time. Plus figured since I provide information to you...

I would actually like to measure this for a M1082 build to see if it is feasibly. But for the person that is looking for one of these for their HMMWV the price might be right. Would you mind me coming out just to make measurements?

Mark, have you figured out what type of shelter you are going to put on the trailer. For mine I was looking for a S280, as it would be perfect size, but hard to find one in Arizona or the west coast right now. I am also thinking about an Ambulance body, and paint it to match the truck and...

Mark, That is the ABS test connector for the trailer.

Nick, you still going to paint the back camo? I still want to come out and see it when you have time. I have been too busy lately to make it over, but now have some time.