Search results

Yes I replaced them on my m52a2 so my new seals will have a new surface to ride on the old ones had a grove . They act like a wear ring or a speedy sleeve just so the seal won't grove the axle it's self . to remove them put a chisel on it like you are going to cut it but tap it lightly in a...

In California can these trucks be used commercially on road or is it only off road ?

When I first bought my m211 1986 I installed a safety switch on the fuel to turn off the fuel when the oil presser dropped to low so if the engine died it would not keep pumping fuel . and I had this kind of problem because the oil presser on the 302 is not very high when idling and it would...

The right ammo by Hornady. I was given these for the holidays check out there wed site .

That a neat looking RV . any chance it be longs to SS member ?

I yes you should . I turned my m211 in to a tractor I pull a car trailer and can move the larger trailer when I need to . It's easy to park in town when we go to dinner . the bed was just to tall .

North of Farmington NM

27 inches on the back I would leave the front drive line out for now . you don't want any damage done to your transfer case simple pushing and pulling can lead to problems

outside to outside of tow eyelets 35 3/4 inches just under 3 feet

Empty it should weight 5740 pounds on the front

I hate to hear this kind of story . Your not even home and you have been targeted . sounds like a movie . Good luck

With your truck weighting !8,400 empty you may be able to register it for 26,000 or under and not need a class B . depending on your state . I had one of my trucks that weighted 14,000 registered for 16,000 and the GVW was 32,000 .

You are right Suv

I would guess the generator set to far back on the trailer because of the fenders on trailer won't let the duels roll any farther ahead and the weight worked the hitch off of the ball on the truck from the constant up ward pressure ?

You might check across the surface with a straight edge . you might find a high spot or a twist .

Look on the passengers side of the frame just ahead of the shock arm there should be M211 #####

bump

I have some shoes that came of my parts trucks that will work for your truck .I will have to check in the shed but you can have them if you want them . kenny

I already PM AMGENERAL and herd back from him . His video and pictures of his cab swamp really helped with my decision on what engine to go with if I find the right parts it a bolt in fit .

Thanks I will check them out . the parts people I have talked to so far have never seen a sae#2 clutch in a mack only sae#1 .