Search results

To tell if the ducts still have the asbestos lining, look for a tightly woven cloth-like material, whitish in color, often with but not always a chalky texture--- if you are not sure, have someone well versed in asbestos take a look or use a test kit available at ace hardware stores (and...

I want to add here that when most of the trucks went in, they capped the heaters off not because of a problem with them but because of asbestos lining in the forward bulkhead ducts..... I have an m447c and an m313 expandable van-- both have asbestos linings in the forward ducts..... I removed...

I have four skytracker forklifts sitting down in Newcastle DE that I need to get moved up to Lakehurst NJ in the next 1-2 weeks. Anyone here up to the challenge? If not, for those of you who already moved lifts out of the Newcastle GL lot, what towing companies did you use? Thanks Z

Hello All, I have a small lot that needs to be picked up at Nellis AFB Nevada and either moved via the steelsoldiers express or dropped at a fedex or UPS store.... They are heater weldments, each is in a cardboard tube about 5 feet long by about 5 inches in diameter-- I have four total-- they...

I have a 6x12x5 trailer going from duluth Georgia to Norfolk Nebraska. Leaving saturday 6/21 at 10am. Pm for phone number. Z

Hello all, I have two shoebox sized items at the gl okc warehouse that are at their two weeks tomorrow.... I also have a trailer body that I am waiting for an euc on at the same site--- can someone local to the okc warehouse grab those two items and hold them for a little bit for me-- like I...

Aww c'mon now Ron, deep down you love the cucv-- after all why would you be trying to make that poor old M1009 feel better if you didn't care :wink:

Bear in mind that the civilian H1 trucks (about 1997 and prior-- I cannot definitively say about after 1997) were classified as class III trucks and therefore were able to skirt a lot of the requirements-- Any civi H1 of that period did not have airbags, collapsible column, etc. (I own an H1...

Hello all, I have a new transmission in Granite Falls, NC that needs to get to either the Sussex NJ or Aberdeen MD shows--- Is anyone planning to come to either show from the Granite Falls, NC area that could bring it along-- figure about 200-250 pounds and no fluids or grease to worry about...

The a/c units made by real time labs corp. are rated at 5 tons cooling capacity-- They are really nice for someone like me that likes to sleep in conditions cold enough to hang meat....... They go together pretty much the same as their smaller counterparts--- the only piece of advice I can...

I had a similar symptom in my suburban with an rcd lift kit (spacer blocks between the rear axle and springs)--- it turned out to be the U-bolts not being tight enough which was allowing the axle to shift slightly during hard stops/ hard takeoffs. I confirmed this with chalked index markings on...

I cannot say about the long wait times, but if there is a discrepancy with your manifest at Lockbourne, simply get on the phone and call either the Lockbourne PD or Ohio State Patrol and file a theft report---- its funny how quickly they can all of a sudden find your missing items when the cops...

I have a set of NOS GM lines available if interested....... These are the two hard lines that cross in front of the fan and behind the radiator..... PM me for info...... Ziggy

Hello all, As promised in the GL wins thread, I am offering LED headlights to the steelsoldiers community...... Details can be found here...... http://www.steelsoldiers.com/parts-sale/95934-truck-lite-nos-headlights-sale.html Thanks Ziggy

I wil lbe there in my usual spot back by the critter barns Friday and Saturday........ Some of the stuff I will have includes: -NOS deuce pressure plates -NOS MKT power kits -Tested am-1780 amps, tested mx7777 suppressors, and some tested intercom boxes -NOS mil brass heater core for the cucv...

My opinion is as follows: I have bought alot of the smaller, lighter duty, cheaper tools in the past to get a certain job done. My experiences with these tools has mostly been less than satisfactory. In the end I decided to start getting the best tool possible for the job to be done-- I get...

Gimpyrobb, I just got the winning bid notification---- I figure I should have the paid invoice either tomorrow or Monday at the latest--- So I would say probably two weeks from Monday 7/2............ I appreciate the help with the pickup............. I will forward the paperwork when I...

Columbus OH----- sorry about that--- thanks for the heads up Ron!!!! Ziggy

Hello all, Is there anyone going to the GL warehouse in Columbus in the next two weeks that can pickup two tents (no poles just the vinyl) and hold them for me until I head back east from NE to NJ this September? Or possibly get them to the Gilbert show? Thanks Ziggy

Awww C'mon Ron--- I seem to remember when you drove one of my m1009's out to NE this past summer that you couldn't get enough of it ----(I seem to remember him even saying something about buying one himself after that trip, hehe)........ Could it maybe be that he only talks smack about them...