Search results

Hi, I fitted tire chains to my M1070 but one side of the chains there is a hook on clip that has no function to tighten and the other side of the chains, I.e. The outside of the tire has a hook and tension latch. I have four sets of chains, they are all like this I would have thought more...

Hi I have a m1113 with the fan bolted to the water pump via 4 3/8 unc bolts there is a spacer between the fan and water pump pulley 11/8 thick it is a 10 bladed fan has any one put in a viscous hud?if so which one? The fan looks the same as the clutch fan on the humvees has any one done away...

Hi, Looking through the manuals that I got with my M1113 they say you cannot drive it very far without the shelter in it or putting 600kg (1500lbs) evenly distributed in the load area. It says that otherwise damage may occur, I was just wondering what damage may occur. The only things I could...

Hi, Here is my Oshkosh with civilian trailer carrying an M10 and half track at this years War and Peace show, in England, left on Sunday which was the wettest day :( it as rather slippery under foot! I didn't realise until I watched this footage that the trailer was going sidewards... The...

Hi, I seem to remember someone mentioned in someone else's thread that they modified an M1070 so the PTO/winch would work with the handbrake off. The person didn't say how - has anyone done this if so can you point me in the right direction before I start tracing the wiring to enable me to do...

Hi, Has anyone needed to buy a replacement voltage regulator for their 24v alternator? If so, could you give me a lead / let me know which company you obtained it from? Thanks, Mark

Hi, I was just wondering what lubrication the steering Tee box should have? This is the steering gearbox that the steering column goes down into and relays the turning motion forwards and backwards. The manual calls it a Tee gearbox. The lubrication manual *LO 9-2320-360-12 does not mention...

Hi more lighting question ! The rear spot lamps top of cab has any one replaced one of the sealed beam units? The sealed beam is ge marked 4 1/2 inch od with screw terminals tried ge web site it appears to be a ge par 36 but is available in various voltage and wattage. Voltage I can check with...

Hi the gauge lights in the m1070 what voltage are they? the bulbs I took out only have 53 stamped in them. Also is it correct they do not come on when you switch the side or head lamps on? Mine only work when you rotate the dimmer switch

hi can any one on here transport a m1070 or recommend some one pick up is Ooltewah,tn going to savannah or Brunswick shipping port Georgia either one is ok what ever is more convient for person moving it.brunswick is 400 mile from pick up it starts runs and drives thanks mark

I have a charging fault on an M1070. When you start it, both the 12 volt and 24 volt generators charge then they stop charging. Is there something common to both the 12 and 24 volt generator that would stop the charging? Charging does not come back on when idling but when you take it out on the...

Hi, I have read conflicting things on this forum that the M1070 is not road legal in the US due to width. Would this be the width with trailer or can you drive just the tractor unit on US roads without over width permits? I am asking as I am considering buying one and after getting an export...