Search results

Most of the time the bulb is good, its the contact between the bulb holder and circuit board. Try turning and re-installing the holder.

Here's the thread where I posted the relevant info and pics of my braces ; http://www.steelsoldiers.com/showthread.php?63541-M1008-Th400-broken-case-issue/page2

A competent alignment shop will be able to tell you whats going on here. It could be that your steering box is no good. Happened to me, got a call from the shop, told me the new rebuilt box had more play in it than my original box. Had to source one from a dedicated steering outfit.

I have manual glow plug operation with AC60's. I find they need more time the original plugs it came with. If the wait light goes out after 7 seconds, I give it another 7. basically double the wait light period. Fires up quicker this way. This is more than safe as the AC60's take 20 seconds to...

"On the firewall just to the left of the brake booster" would be the glow plug relay. The cold start solenoid is in the Injection pump, under the pump housing cover. There is a green wire to the rear most connector, it also connects to your fast idle. The pink wire is your shut off solenoid. The...

5 years ago mine failed. I went to my local parts store and they had a copper one in stock. Looked the same, pumps lots of heat. If someone wants I could look up the part number.

The correct CDR's are available on e-bay for about $22.00. Search under M1009.

Resurrecting this thread. No luck in Canada with throttle cable GM part number 14038644 from a dealer. Tried GM parts direct, no listing for part or number. Anyone source one out lately? Dont want to go the Chinese route, rather find a good used one if new is no longer available.

CUCV electric sells a newer Starter relay ; # 4952 Replaces GM 15591718. Ordered one as a spare. I've had my M1009 for 8 years, 90,000 + miles, literally thousands of starts, in process of re-building my starter again. Still running the stock starter relay. I asked two guys up here who have...

Interior color; Bronze. 85 GM - 76D Bronze Metallic. Good luck finding a good condition dash in this color. Mine is black. Most end up spraying a dash to match. I hear SEM 15063 Burgundy is a good match.

If you've got fuel coming from the filter bleed screw, then the next step is to bleed the injectors. I know someone is going to pipe up here and say you can just keep cranking and it will self bleed, but sorry, thats never worked for me. I was never under the impression that this is a self...

When you say,"you ran out of fuel",does that mean it was running and died or was it a failure to restart? Whats the trucks history, has it ever been hard starting, how long have you had it, what are any other symptoms you've noticed. There is no replacement for the factory stanadyne injection...

I had a crossover pipe leak last year. Changed the gaskets, it still leaked. Took the crossover pipe off again, close examination revealed a hairline crack. Had to replace it, found one for $30. Check yours before putting it back together. As for the thermostat housing bolts. Anti-seize is...

Thought I would share this pic of the wear on my forward rear driveshaft u-joint , its only on 3 trunnions. M1009 has a 4" lift. As you know there is quite the angle on a M1009 fwd rear u-joint with a 4" lift. When I first got it on the road in 2004 the u-joint started squeeling after 28,000...

"1. IS there an auto parts store that sells foreign auto parts? If so it has standard Chevrolet parts." Sorry to have to tell you, but the world out there is not like America. You did notice his location was Kharkov, Ukraine? There are probably a number of newish American SUV's there, but...

I haven't ordered anything from them, was turned onto this site by another member who bought a IP. I of course would inquire about the injector brand before buying but the IP appears to be OK, cant see them using Chinese parts in that. I share your revulsion for these poorly made parts. This...

Have most of the parts in. New solenoid doesn't have spring or plunger. I also dont have a new dust boot, seem to remember mine was a little worse for wear. Since I am replacing most of the starter internals for good measure. Should I replace these items, are they a wear item?

You mentioned you need lines. Are those the hard metal lines going from IP to injectors or the rubber return lines going between injectors? Because Germany is closer and shipping charges would be less, this site has lots of CUCV parts ...

Thanks for the part number! Yesterday I went by my local parts store, they usually have everything 6.2 related in stock that I ever needed. The guy tells me his system wouldn't show that part, go to a GM dealer. I'm sure when I give them this number it will be available. Can't wait to go back...

Looking for a air filter base gasket ; 15530620 GROMMET NONMETALLIC. Anyone know where to obtain one or is it a standard diameter part that I could source from a local store?