Search results

RE: Water In Fuel Indicator If any one is looking for the filter base complete try Neosho Surplus Auto Parts. thanks jimm1009.

the truck bed I bought from GL came with 35 7 foot torsion bars that I wound up scrapping for more than I paid for the lot. Sometimes the junk they throw in is a good thing. The ambulance I bought from GSA was filled with cabinets and trash though, filled up my whole dumpster that week.

RE: Re: RE: Re: Civilian Nomenclature and tow bar question M1008s and M1028s and M1031s are CD30903s, the civilian model is (c/k) K30903. but they're all K30s.

Jim, Did the ebay seller have more or a store? thanks

Any one know of any one who sells the COMPLETE fuel filter base WITH wiring? My M1009 is missing the fuel filter and the wiring, I have one from a Civv 6.2 but the wiring is different. It looks like the set on the CUCV filter has a wire that goes to the water in fuel solenoid, the middle one...

From past experience a U haul trailer will not hold any type of CUCV truck comfortably. I always rent an equipment trailer from a rental place, that has a gvw of 9940. Tilt bed if you can find it works great. A while back I bought a cheapo electric boat winch that runs off a 12v battery and...

good Luck. Seems it would be easier and a lot safer to just drive down and pull it back with a trailer. Did you physically check it out before bidding? A lot of them have bent driveshafts, bad batteries, missing parts, bad alternators, missing glow plug cards and wiring, mine had no fuel tank...

GL auction that just ended, nice M1031 Contact Maintenance truck, but $7400.00? Wow. http://cgi.govliquidation.com/auction/view?id=1609649 Sale 3264, item 3908.

I've bought 3 of 6 CUCVs so far with electrical parts either cut,missing, etc. USE the TMS, study the wiring, have patience. I got all 3 of them to run eventually, each one had different problems, the 1st one I still have was missing the most, almost all of the under hood wires and dash had been...

CAlled and spoke to a live person, sent two emails, FINALLY received my SF97 Thursday, 2 and a half monthes after paying for my truck. AND now, who knows, another at least 4 week wait for the title from the state of Pa. What a way to do business!

Here's a generic reply from GL to an email request: All I can say is I still don't know when I'm getting an SF97 for a truck that was paid for December 19 2007! VERY POOR SERVICE! Why oh why does it take so long to receive a SF97? It has been 2 monthes since I applied, my credit card was...

I've bought two Cucvs with the fluids drained. Both had ALL Fluids including both axles, crankcase, trans, P/s pump, W/S washer fluid and brake fluid from the master cylinder. funny thing is the one still had diesel in the fuel tank!

they have the card with the harness: 01-199-1579 SWITCH ASSY GLOW PLUG CUCV (GLOW PLUG CARD WITH HARNESS ) $149.50

Good Luck with your new truck. They might give you a key, remember, one key fits all CUCVs. they do flat tow if you set it up right, I've trailered mine home just to be safe. Did you inspect it before you bought it? Check for bent driveshaft, cracked tailhousing, which is common from a lot of...

thanks, sent Dan an email

Looking for a good complete driver's door (with glass, handles, etc.) trans and transfer case, both alternators for a M1009 CUCV. Going to Jim Thorpe show Saturday, anyone else going that has the above for sale I'm greatly interested. thanks

Well said Brian

Inside & outside of cab with ambulance body removed

Plan on using the M1010 chassis under my 83 K30 dually pickup, so I guess I might have a manual trans gas powered looking M1028a3 in the works sorta. Frame is super clean! I'll take pics of the back of the cab after it stops snowing.

turned out to be simpler than I thought. Just drill out the rivets holding the aluminum pass through retainer, disconnect the wiring and fuel hoses, and viola!